12V 1400RPM 2kgfcm Planetary DC Geared Motor with Encoder

12V 1400RPM 2kgfcm Planetary DC Geared Motor with Encoder
Please inform me as soon as the product is available again.
Please enter these characters in the following text field.
₹4,999.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • IG42E-04K
  • IG42E-04K
  The planetary geared motor is always well known for its low backlash and higher... more
Product information "12V 1400RPM 2kgfcm Planetary DC Geared Motor with Encoder"

 

The planetary geared motor is always well known for its low backlash and higher efficiency characteristic to meet the higher expectation. It is manufactured by an established Taiwanese motor company that well known for its quality and durability. 

This 42mm diameter model is even more powerful than the 32mm models to fit your high torque needs.

The motor comes with a 4:1 gear head that produced 1400 RPM and 220mN.m torque. It is suitable for general purpose automation projects. It also comes with a 5 pulses per rotation encoder feedback to provide real-time feedback on the rotating position. 

And if you need a couple for the shaft, check this 8mm hex coupling. It will enable you use this motor easily.

Specification:
  • Voltage: 12VDC
  • Rated Torque: 2.24kgf.cm (220mN.m) 
  • Rated Speed: 1400 RPM
  • Rated Current: 5.5A 
  • Rated Power output: 41.3W
  • Shaft: 8mm diameter x 20mm length
  • Compatible motor driver:
    • Arduino - Shield MD10
    • MD10C
    • MDD10A
    • MDS40B
  • Gear ratio: 4:1
  • Encoder Output: 20 pulses per rotation, single channel output

Circuit Connection (To Arduino):

Note: Don’t forget the 10kΩ resistor (Pull-up) connection to Arduino digital pin. Refer to the picture below for your reference.

 

Related links to "12V 1400RPM 2kgfcm Planetary DC Geared Motor with Encoder"
Read, write and discuss reviews... more
Customer evaluation for "12V 1400RPM 2kgfcm Planetary DC Geared Motor with Encoder"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed