SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)

Please inform me as soon as the product is available again.
₹2,229.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • DFR-SEN0227
  • SEN0227
INTRODUCTION This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe.... more
Product information "SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)"

INTRODUCTION

This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
The Arduino SHT20 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerge in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient. 


Sensor Interface:

  • Red VCC
  • Green GND
  • Blue (Black) SDA
  • Yellow (White) SCL

SPECIFICATION

  • Operating Voltage: 3.3/5V
  • Communication Interface: I2C / IIC
  • Protection Class: waterproof anti-condensation
  • RH Response Time: 8s (tau63%)
  • Accuracy: ±3% RH / ±0.3 ?
  • Measuring Range: 0-100% RH / -40-125 ?
  • Dimension: 73mm * 17mm / 2.87 * 0.67 inches

SHIPPING LIST

  • SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe) x1

  • Jumper Wires 7.8" F/F x4
Related links to "SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)"
Read, write and discuss reviews... more
Customer evaluation for "SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed