Wi-FIRE: WiFi Enabled PIC32MZ Microcontroller Board

₹7,899.00 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • DG-410-302
Building on the previous successes with the WF32, the Wi-FIRE uses the same 43 available I/O... more
Product information "Wi-FIRE: WiFi Enabled PIC32MZ Microcontroller Board"

Building on the previous successes with the WF32, the Wi-FIRE uses the same 43 available I/O pins, 12 analog inputs, 3.3 operating voltage, 4 user LEDs, potentiometer, buttons, uses MRF24 on-board wireless module, microSD Card, dedicated SPI Signals and high efficiency switching 3.3V switching power supply for low-power operation. 

Where the boards differ is in what the PIC32MZ processor can deliver. 

The Wi-FIRE is significantly faster than its WF32 counterpart, with 200 MHz operation speed, 2MB of Flash, 512kB RAM, High-Speed USB and a 50MHz SPI. The PIC32MZ core includes the MIPS M5150 CPU Core from OpenOCD

The Wi-FIRE can be programmed using MPIDE and with the addition of a compatible in-system programmer/debugger, can be used with the more fully featured/advanced Microchip MPLAB® X IDE.

Stats:

Processor/IC: Microchip® PIC32MZ2048EFG100 microcontroller

Connector(s): USB A micro-B cable (USB cable not included), USB Serial Converter, microSD card connector

Programming: MPIDE, MPLAB X (with separate programmer), OpenOCD for hardware debugging

Features:

  • PIC32MZ processor

  • 2MB Flash memory

  • 512KB RAM

  • 200 MHz maximum operating speed

  • 50 MHz six 4-wire SPI, six UART modules, five I2C modules, PPS

  • 10-bit ADC module: 500 Ksps rate with one Sample and Hold (S&H) circuits, up to 40 analog inputs

  • 43 available I/O pins with on-board user interfaces

  • 3.3V operating voltage

  • 3.3V and 5V regulators

  • 12 analog inputs

  • PC connection uses a USB A to micro-B cable (not included)

  • USB 2.0 Full-Speed / Hi-Speed OTG controller with A and micro-AB connectors

  • MicroSD card connector

  • Four LEDs, two Pushbuttons, one Potentiometer

  • Fully supported by MPIDE

  • For more advanced users, MPLAB X IDE is available with a separate programmer

  • EJTAG header for external debugging

  • Microchip MRF24WG0MA WiFi module

  • DSP-enhanced core: Four 64-bit accumulators, single-cycle MAC, saturating and fractional math

 For user documentation, software, and tools support for OpenOCD.

What's Included:

  • Wi-FIRE
  • Custom Digilent cardboard box with protective foam

Support Materials:

Datasheet

Schematics (PDF)

For all other material:

Resource Center

Related links to "Wi-FIRE: WiFi Enabled PIC32MZ Microcontroller Board"
Read, write and discuss reviews... more
Customer evaluation for "Wi-FIRE: WiFi Enabled PIC32MZ Microcontroller Board"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

I have read the data protection information.

NEW
Arty Pmod Pack Arty Pmod Pack
₹8,039.00 *
NEW
NEW
The Zynq Book The Zynq Book
₹3,789.00 *
NEW
Zybo Pmod Pack Zybo Pmod Pack
₹6,889.00 *
NEW
NEW
Viewed