Nexys 4 DDR Artix-7 FPGA: Trainer Board Recommended for ECE Curriculum

₹30,449.00 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • DG-410-292-RET
The Nexys 4 DDR is a drop-in replacement for our cellular RAM-based Nexys boards. Featuring the... more
Product information "Nexys 4 DDR Artix-7 FPGA: Trainer Board Recommended for ECE Curriculum"

The Nexys 4 DDR is a drop-in replacement for our cellular RAM-based Nexys boards. Featuring the same Artix™-7 field programmable gate array (FPGA) from Xilinx®, the Nexys 4 DDR is a ready-to-use digital circuit development platform designed to bring additional industry applications into the classroom environment. The Artix-7 FPGA is optimized for high-performance logic, and offers more capacity, higher performance, and more resources than earlier designs. With its large, high-capacity FPGA (Xilinx part number XC7A100T-1CSG324C) and collection of USB, Ethernet, and other ports, the Nexys 4 DDR can host designs ranging from introductory combinational circuits to powerful embedded processors. Several built-in peripherals, including an accelerometer, a temperature sensor, MEMs digital microphone, speaker amplifier, and plenty of I/O devices allow the Nexys 4 DDR to be used for a wide range of designs without needing any other components. The most notable improvement is the replacement of the 16 MiB CellularRAM with a 128 MiB DDR2 SDRAM memory. Digilent will provide a VHDL reference module that wraps the complexity of a DDR2 controller and is backwards compatible with the asynchronous SRAM interface of the CellularRAM, with certain limitations. 

The Nexys 4 DDR is compatible with Xilinx's new high-performance Vivado® Design Suite as well as the ISE® toolset, which includes ChipScope™ and EDK. Xilinx offers free WebPACK™ versions of these tool sets, so designs can be implemented at no additional cost. 

Stats:

Processor/IC: Xilinx Artix-7 FPGA XC7A100T-1CSG324C

Connector(s):

  • UART/JTAG USB port
  • Pmod port for XADC signals 
  • Audio connector
  • Ethernet connector
  • USB host connector
  • microSD card connector
  • 12-bit VGA output 
  • Four Pmod ports
  • Power jack

Programming: Vivado Design Suite as well as the ISE toolset

Features:

  • Xilinx Artix-7 FPGA XC7A100T-1CSG324C
  • 15,850 logic slices, each with four 6-input LUTs and 8 flip-flops 
  • 4,860 Kbits of fast block RAM 
  • Six clock management tiles, each with phase-locked loop (PLL) 
  • 240 DSP slices 
  • Internal clock speeds exceeding 450 MHz 
  • On-chip analog-to-digital converter (XADC) 
  • 128 MiB DDR2 
  • Serial Flash 
  • Digilent USB-JTAG port for FPGA programming and communication 
  • microSD card connector 
  • Ships with rugged plastic case and USB cable
  • USB-UART Bridge 
  • 10/100 Ethernet PHY 
  • PWM audio output 
  • 3-axis accelerometer 
  • 16 user switches 
  • 16 user LEDs
  • Two tri-color LEDs 
  • PDM microphone
  • Temperature sensor 
  • Two 4-digit 7-segment displays 
  • USB HID Host for mice, keyboards and memory sticks 
  • Pmod for XADC signals 
  • 12-bit VGA output 
  • Four Pmod ports

What's Included:

  • Nexys 4 DDR Artix-7 FPGA
  • Digilent custom hardshell plastic case with protective foam
  • Micro USB cable

Support Materials:

Datasheet (PDF)

Schematics (PDF)

For all other material:

Resource Center

Get Academic Pricing

Product Videos:

Related links to "Nexys 4 DDR Artix-7 FPGA: Trainer Board Recommended for ECE Curriculum"
Read, write and discuss reviews... more
Customer evaluation for "Nexys 4 DDR Artix-7 FPGA: Trainer Board Recommended for ECE Curriculum"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

I have read the data protection information.

NEW
Arty Pmod Pack Arty Pmod Pack
₹8,039.00 *
NEW
NEW
The Zynq Book The Zynq Book
₹3,789.00 *
NEW
Zybo Pmod Pack Zybo Pmod Pack
₹6,889.00 *
NEW
NEW
Viewed