Prices incl. VAT plus shipping costs
Out of Stock
- Order number: DG-6015-410-001
- Manufacturer product ID: 6015-410-001
The NetFPGA-1G-CML is a versatile, low cost network hardware development platform featuring a Xilinx® Kintex®-7 XC7K325T-1FFG676 FPGA and includes four Ethernet interfaces capable of negotiating up to 1 GB/s connections. 512 MB of 800 MHz DDR3 can support high-throughput packet buffering while 4.5 MB of QDRII+ can maintain low-latency access to high demand data, like routing tables. Rapid boot configuration is supported by a 128 MB BPI Flash, which is also available for non-volatile storage applications. The standard PCIe form factor supports high-speed x4 Gen 2 interfacing. The FMC carrier connector provides a convenient expansion interface for extending card functionality via Select I/O and GTX serial interfaces. The FMC connector can support SATA-II data rates for network storage applications, and can also be used to extend functionality via a wide variety of other cards designed for communication, measurement, and control.
The NetFPGA-1G-CML is designed to support the Stanford NetFPGA architecture with reference designs available through the NetFPGA GitHub Organization (http://www.github.com/cmlab/netfpga-1g-cml/wiki). It is fully compatible with Xilinx Vivado® and ISE® Design Suites as well as the Xilinx SDK for embedded software design.
For reference projects, design resources, and the most up-to-date documentation, please visit the NetFPGA-1G-CML Resource Center.
Processor/IC: Xilinx Kintex-7 XC7K325T-1FFG676 FPGA
- Xilinx Kintex-7 XC7K325T-1FFG676 FPGA
- X4 Gen 2 PCI Express
- 1-Gbit BPI Flash
- SD card slot
- Real time clock
- Crypto-authentication chip
- Can be powered inside or outside a PC using a standard ATX power supply with PCIe 6 pin or 6pin+2 connector. Please refer to reference manual for more detail
- X16 4.5 MB QDRII+ static RAM (450 MHz)
- X8 512 MB DDR3 dynamic RAM (800 MHz)
- Low-jitter 200 MHz oscillator
- Four 10/100/1000 Ethernet PHYs with RGMII
- 32-bit PIC microcontroller
- USB microcontroller
- Four on-board LEDs and four onboard general-purpose buttons
- High pin count FMC connector (VITA 57) with 100 Select-IO and 4 GTX serial pairs
- Two Pmod ports