Close filters
 
  •  
from to
1 From 8
No results were found for the filter!
NEW
Digilent PCB Ruler
Digilent PCB Ruler
Do you find yourself wishing that you had a new cool way to interact with Pmods that wasn't the same old system board or breadboard? How about a sweet PCB ruler? With 3 different Pmod inputs, 8 buttons you can use with your fingers,...
₹569.00 *
NEW
2x6-pin to Dual 6-pin Pmod Splitter Cable
2x6-pin to Dual 6-pin Pmod Splitter Cable
Features: Designed for use with Digilent Peripheral Modules that have 2x6 pin connectors Designed to connect two 6-pin system board connectors to a 12-pin Pmod connector, or to connect a 12-pin system board connector to two 6-pin Pmod...
₹459.00 *
NEW
6" Pmod Cable Kit: 6-pin
6" Pmod Cable Kit: 6-pin
This kit is a handy accompaniment to your 6-pin Pmod. The extension cable lets you locate your Pmod away from its host board, and the included male gender changer can provide extra connectivity to both system and prototyping boards....
₹459.00 *
NEW
12" Pmod Cable Kit: 6-pin
12" Pmod Cable Kit: 6-pin
This kit is a handy accompaniment to your 6-pin Pmod. The extension cable lets you locate your Pmod away from its host board, and the included male gender changer can provide extra connectivity to both system and prototyping boards....
₹459.00 *
NEW
18" Pmod Cable Kit: 6-pin
18" Pmod Cable Kit: 6-pin
This kit is a handy accompaniment to your 6-pin Pmod. The extension cable lets you locate your Pmod away from its host board, and the included male gender changer can provide extra connectivity to both system and prototyping boards....
₹399.00 *
NEW
Pmod Cable Kit: 2x6-pin and 2x6 Pin to Dual 6-pin Pmod Splitter Cable
Pmod Cable Kit: 2x6-pin and 2x6 Pin to Dual...
This kit is a handy accompaniment to your 12-pin Pmod. The extension cables let you locate your Pmod 6" away from its host board, or use your 12-pin Pmod on a system board with only two 6-pin Pmod headers available. We've also...
₹599.00 *
NEW
2x6 Pin Pmod Cable
2x6 Pin Pmod Cable
Features: Designed to connect a 12-pin Pmod to a 12-pin system board connector Can be used to send Digilent System board signals to and from outside devices Uses standard 100mil-spaced 25mil square connectors 6" (15cm) in length
₹459.00 *
NEW
Pmod RS485: High-speed Isolated Communication
Pmod RS485: High-speed Isolated Communication
The Pmod RS485 is a high-speed communication module powered by the Analog Devices ADM582E . By communicating with the device via UART, users can take advantage of the RS485 communication protocol with speeds up to 16 Mbps. Features:...
₹2,639.00 *
NEW
Pmod SSD: Seven-segment Display
Pmod SSD: Seven-segment Display
The Pmod SSD is a two-digit seven-segment display. Users can toggle through GPIO signals which digit is currently on at a rate of 50 Hz or greater to achieve persistence-of-vision to give the effect of both digits being lit up...
₹799.00 *
NEW
Pmod Clip: Mechanical Mount for Pmod boards
Pmod Clip: Mechanical Mount for Pmod boards
Useful for securely attaching a Pmod to your project or application. Features: Works with any Pmod 0.80" in width Can also accomodate a Cerebot Nano What's Included: One Pmod clip One 8-32 nut, screw, and washer
₹339.00 *
NEW
Pmod OLEDrgb: 96 x 64 RGB OLED Display with 16-bit color resolution
Pmod OLEDrgb: 96 x 64 RGB OLED Display with...
The Pmod OLEDrgb features a 96 x 64 pixel RGB OLED display that is capable of 16-bit color resolution. As a graphical display, users may show off graphs, full-color pictures, text, and anything else they want to see by communicating with...
₹1,999.00 *
NEW
Pmod TPH2: 12-pin Test Point Header
Pmod TPH2: 12-pin Test Point Header
The Pmod TPH2 offers 12 external pin headers so that users can easily test the GPIO signals passing through each of the pins. Features: 12 external test point headers Easily access and test signals passing through Small PCB size for...
₹569.00 *
1 From 8
Viewed