Top seller
No results were found for the filter!
AC Current sensor Applications Suitable for the current measuring Monitoring and protection of AC motor Lighting equipment Air compressor Key features Open Size: 13mm x 13mm Leading Wire in Length: 1m Dielectric Strength (between shell and output): 1000V...
₹1,999.00 *
32x32 RGB LED Matrix Panel - 5mm pitch Hi-brightness RGB LED matrix panel, with 1024 RGB LEDs arranged in a 32x32 grid on the front on a 5mm grid, total size 160x160mm. Comes with one IDC cable and a power cable. Specification Type LED Matrix
₹4,099.00 *
32x32 RGB LED Matrix Panel - 6mm pitch Hi-brightness RGB LED matrix panel, with 1024 RGB LEDs arranged in a 32x32 grid on the front on a 6mm grid, total size 190x190mm. Comes with one IDC cable and a power cable. Specification Type LED Matrix
₹4,099.00 *
Gesture board The Gesture board, carrying Microchip’s MGC3130 3D gesture recognition controller, brings a new approach to designing intuitive user interfaces. It’s like a touchpad whose input area extends 10cm upwards into space. Users will be able to...
₹5,149.00 *
ECG/EMG cable ECG/EMG cable with 3.5mm phone jack. 3-wire ECG/EMG cable with 3.5mm phone jack. Intended to be used with adhesive electrode pads to record electrocardiograms with ECG click , ECG 2 click or EMG click.
₹2,519.00 *
Graphic LCD 128x64 with TouchPanel Analog resistive touch panel attached to the GLCD 128x64 to form GLCD Touch screen.
₹2,519.00 *
Thermocouple Type-K Glass Braid Insulated Type-K thermocouple with glass braid insulation is used for precision measurements of high temperatures. Thermocouple itself can measure up to 480°C (900°F). It is 2 meters long and ends with PCC-SMP connector which is compatible with...
₹2,629.00 *
OBD-II to DB9 cable OBD II to DB9 cable enables you to connect with your car’s OBD-II system. You just need to plug OBD II connector on one end to your car and the other end it into some sort of hardware interface which has a DB9 connector, like our OBD II...
₹1,259.00 *
Active GPS Antenna This active GPS Antenna is 100% waterproof external antenna that can be used with our GPS and GNSS Click boards™. If you are looking for a perfect external antenna for your locator device, this is the right product for you. Frequency...
₹1,039.00 *
GSM booster GSM Booster is a pin-compatible replacement for Telit GM862-QUAD module while retaining the same form factor of this popular module. GSM Booster contains Telit’s new GL865-QUAD GSM module, MMCX GSM antenna connector, SIM card holder,...
₹7,249.00 *
MAX232 Boards GSM booster Wall Power ECG EMG cable PT100 3-wire mikroProg for USB-C to USB-C Solar Panel Plastic Pen for 32x32 RGB LED Graphic LCD TFT Board 5 Graphic LCD Fusion for ARM TFT Board 3 Gesture board micro bit click Active GPS GSR Electrode Peltier Element mikroProg for Rectangular NFC Li-Polymer 32x32 RGB LED AC Current OBD-II to DB9 mikroBUS Serial Cable Step Motor 5v Thermocouple
Viewed