Top seller
NEW
NEW
7x10 B click 7x10 B click
₹1,579.00 *
NEW
7x10 Y click 7x10 Y click
₹1,579.00 *
NEW
16x12 G click 16x12 G click
₹3,149.00 *
NEW
NEW
NEW
LED Flash click LED Flash click
₹3,569.00 *
NEW
7-SEG RGB click 7-SEG RGB click
₹3,049.00 *
Close filters
 
  •  
from to
1 From 3
No results were found for the filter!
NEW
BIG 7-SEG R click
BIG 7-SEG R click
BIG 7-SEG R click is what you need if you want to add a seven-segment LED display to your project. This click features an SC10-21SRWA seven-segment display. Communication between the MCU and the SC10-21SRWA display is established via...
₹1,999.00 *
NEW
16x9 G click
16x9 G click
16x9 G click contains a green LED matrix and the IS31FL3731 audio modulated matrix LED driver. The dimension of the LED matrix is 16x9. Each LED can be controlled individually – both for on/off control and light intensity. The click is...
₹3,569.00 *
NEW
OLED Switch click
OLED Switch click
An OLED built in a button This board has a module that combines a button and a full color organic LED display, plus input/output screw terminals for connecting an external circuit (to toggle it on and off). The mechanical button itself...
₹10,399.00 *
NEW
Matrix G click
Matrix G click
Matrix G click is a mikroBUS add-on board with two green 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers. The active area of each matrix is 7.62mm high and 5.08 mm wide. 7x5 is a standard resolution for displaying ASCII...
₹3,049.00 *
NEW
Matrix R click
Matrix R click
Matrix R click is a mikroBUS add-on board with two red 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers. The active area of each matrix is 7.62mm high and 5.08 mm wide. 7x5 is a standard resolution for displaying ASCII...
₹3,049.00 *
NEW
Matrix RGB click
Matrix RGB click
Matrix RGB click is a mikroBUS™ add-on board powered by a 32-bit FT900 MCU designed specifically for powering 16x32 RGB LED matrices. The board has a 16 wire IDC connector for connecting to a single 16x32 LED panel; however, the firmware...
₹2,519.00 *
NEW
Led ring R click
Led ring R click
LED ring R click is a mikroBUS™ add-on board with a ring of 32 red LEDs driven by four 8-bit 74HC595 serial-in, parallel-out shift registers. The ring is 25mm in diameter. The click communicates with the target MCU through the mikroBUS™...
₹1,679.00 *
NEW
7x10 R click
7x10 R click
7x10 R click can be used for displaying letters on display with 7x5 font resolution. It carries a matrix of 70 red LEDs driven by a pair of 8-bit serial-in, parallel-out shift registers, a Darlington Transistor array and a Johnson...
₹1,579.00 *
NEW
4X4 RGB click
4X4 RGB click
4x4 RGB click carries a matrix of 16 WS2812 RGB LEDs and a MCP1826 low dropout regulator. These LEDs actually consist of three single colored LEDs (Red, Green and Blue), plus a control chip in a single package; various colors can be...
₹1,999.00 *
NEW
AlphaNum R click
AlphaNum R click
AlphaNum click is a simple solution for adding 14-segment alphanumeric display to your device. The board carries two TLC5926 16-bit Constant-Current LED sink Drivers as well as a dual character red LED 14-segment display (with two...
₹1,579.00 *
NEW
AlphaNum G click
AlphaNum G click
AlphaNum click is a simple solution for adding 14-segment alphanumeric display to your device. The board carries two TLC5926 16-bit Constant-Current LED sink Drivers as well as a dual character green LED 14-segment display (with two...
₹1,579.00 *
NEW
OLED C click
OLED C click
OLED C click lets you add a small but bright and crisp color OLED display to your design. It carries the PSP27801 OLED display, the same one that we have used on Hexiwear. The click is designed to run on 3.3V power supply only. It...
₹3,049.00 *
1 From 3
Viewed