Top seller
Close filters
 
  •  
from to
3 From 4
No results were found for the filter!
OLED B click
OLED B click
OLED B click carries a 96 x 39px blue monochrome passive matrix OLED display. The display is bright, has a wide viewing angle and low power consumption. To drive the display, OLED B click features an SSD1306 controller. It's built-in...
₹2,519.00 *
EVE Click
EVE Click
EVE Click is a display controller board in mikroBUS form factor. It features state-of-the-art FT800Q graphics controller which integrates display, audio and touch onto a low cost, easy-to-use, single-chip solution. With 12 embedded...
₹4,099.00 *
BarGraph click
BarGraph click
BarGraph Click is a compact and easy solution for adding ten-segment light bar display to your design. It features JSB-R102510Z light bar display as well as two 74HC595 shift registers. The 74HC595 IC contains an 8-bit serial in,...
₹1,259.00 *
8x8 B click
8x8 B click
8x8 B Click is an add-on board in mikroBUS form factor. It’s a compact and easy solution for adding 8x8 BLUE LED display matrix to your design. It features MAX7219 8-digit LED display driver module as well as 64 BLUE LED diodes. 8x8 B...
₹1,889.00 *
OSD click
OSD click
OSD Click features MAX7456 single-channel monochrome OSD module with integrated EEPROM memory as well as two RCA sockets. It is used to create on-screen menus and other video overlays, such as custom graphics, company logo, time and date...
₹3,679.00 *
8x8 G click
8x8 G click
8x8 G Click is an add-on board in mikroBUS™ form factor. It’s a compact and easy solution for adding 8x8 GREEN LED display matrix to your design. It features MAX7219 8-digit LED display driver module as well as 64 GREEN LED diodes. 8x8 G...
₹1,579.00 *
8x8 Y click
8x8 Y click
8x8 Y Click is an add-on board in mikroBUS form factor. It’s a compact and easy solution for adding 8x8 YELLOW LED display matrix to your design. It features MAX7219 8-digit LED display driver module as well as 64 YELLOW LED diodes. 8x8...
₹1,579.00 *
8x8 R click
8x8 R click
8x8 R Click is an add-on board in mikroBUS form factor. It’s a compact and easy solution for adding 8x8 RED LED display matrix to your design. It features MAX7219 8-digit LED display driver module as well as 64 RED LED diodes. 8x8 R...
₹1,579.00 *
7seg click
7seg click
7seg click is an accessory board in mikroBUS form factor. It’s a compact and easy solution for adding 2-digit seven-segment display to your device. It features two 74HC595 8-bit serial-in, parallel-out shift register modules as well as...
₹1,049.00 *
UT-S 7-SEG R click
UT-S 7-SEG R click
7-segment LED display is the most commonly used type of display to represent changing numerical values. The principle is very simple - seven LED segments are positioned in a certain shape and by turning specific segments on or off, the...
₹2,099.00 *
BarGraph 3 Click
BarGraph 3 Click
How does it work? When it comes to driving an array of LED segments, using so-called shift-register ICs is almost unavoidable. This Click board™ uses a single 74HC595 IC , a tri-state, serial-in, parallel-out, 8-bit shift-register with...
₹1,579.00 *
RGB Driver click
RGB Driver click
RGB Driver click is an RGB LED driver, capable of driving RGB LED stripes, LED fixtures and other RGB LED applications that demand an increased amount of current and voltage. Besides the NCP5623B IC, a triple output RGB LED driver IC,...
₹1,579.00 *
3 From 4
Viewed