Top seller
No results were found for the filter!
4G LTE-E click (Europe)
4G LTE-E click carries the LARA-R211 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target microcontroller over UART interface, with...
₹12,079.00 *
ccRF 3 click
ccRF 3 click carries the CC1120 high-performance RF transceiver for narrowband systems from Texas Instruments. The clicks will enable you to add a low-power consumption radio transceiver at 433 MHz frequency . ccRF 3 click is designed to...
₹3,779.00 *
SPIRIT click
SPIRIT click carries the SP1ML 868MHz ultra low-power RF module. The board is designed to use 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over UART interface, with additional functionality...
₹4,099.00 *
GSM/GNSS 2 click
GSM/GNSS 2 click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click carries SIM868 quad-band GSM/GPRS module. GSM/GNSS 2 click is designed to run on either 3.3V or 5V power supply. It...
₹7,249.00 *
WiFi ESP click
WiFi ESP click carries the ESP-WROOM-02 module that integrates ESP8266EX. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over UART interface and the following pins on the mikroBUS™...
₹1,579.00 *
GSM/GNSS click
GSM/GNSS click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click features Quectel’s MC60 quad-band module. GSM/GNSS click runs on either 3.3V or 5V power supply and communicates with...
₹8,299.00 *
GNSS 4 click
GNSS 4 click carries SAM-M8Q patch antenna module from u-blox. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C or UART interface. What is GNSS? GNSS stands for Global...
₹4,619.00 *
NFC Tag 2 click
NFC Tag 2 click carries the NT3H1101 NTAG I2C energy harvesting NFC Forum Type 2 Tag from NXP. The click is designed to run on a 3.3V power supply only. It communicates with the target MCU over I2C interface and the INT pin (field...
₹1,259.00 *
EnOcean 2 click
EnOcean 2 click carries the TCM 515Z transceiver, based on the 2.4 GHz IEEE 802.15.4 radio standard. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over UART interface. This...
₹4,099.00 *
GSM 4 click
GSM 4 click is a mikroBUS™ add-on board that features the u-blox SARA-G3 series 2.5G GSM/GPRS cellular quad-band module. The SARA-G3 module has a miniature LGA (Land Grid Array) form factor as well as an RF transceiver and a power...
₹5,149.00 *
BT Audio click
Bluetooth class 2 radio and DSP processor combined Microchip’s RN52 Bluetooth audio module delivers high quality audio in small form factor (26.0 mm x 13.5 mm x 2.7 mm). The module combines a class 2 Bluetooth radio and an embedded DSP...
₹5,149.00 *
BLE 3 click
Built-in RTC saves additional energy One of the standout features of the NINA-B1 module is its real time counter functionality. This counter can be used to generate precisely timed BLE advertising events (broadcasting packets to every...
₹4,289.00 *
NFC Tag 4 Click MiWi click BT Audio click nRF T click GNSS 4 click ccRF2 click LTE IoT click WiFly click RN4678 click ccRF click NFC Tag 2 click 6LoWPAN C click NB IoT Click WiFi 10 click GPS 4 click NFC click MPU 9DOF Click WiFi 9 Click GSM2 click GNSS 5 click LoRa 4 click LoRa click WiFi 5 click AnyNet 2G click GSM Click MiWi 2 click AnyNet 3G-EA WiFi 4 click 3G-EA Click Eu EnOcean 3 Click LTE IoT 2 Click BEE click IQRF click LTE CAT.1-EU GSM-GPS click BLE 4 Click GSM GNSS click GSM GNSS 2 CC3100 click 3G-AA Click EnOcean click IrDA2 click Thingstream nRF S click WiFi BLE click LoRa 3 click
Viewed