ADC121 Potentiometer Input I2C Mini Module

ADC121 Potentiometer Input I2C Mini Module
Please inform me as soon as the product is available again.
Please enter these characters in the following text field.
₹2,079.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • NCD-PR37-5
  • PR37-5
  Our I2C Potentiometer Mini Module provides a convenient solution for applications that... more
Product information "ADC121 Potentiometer Input I2C Mini Module"

 

Our I2C Potentiometer Mini Module provides a convenient solution for applications that require digital readings of a user-set potentiometer.

This Mini Module allows users to ask for the potentiometer position over the I2C bus, converting tactile movements into digital data that can be used for a multitude of interface applications.

Digitally read the on-board potentiometer and use the incoming data for IoT-based light-dimming applications, or fine-tune program settings using a conventional knob.

This potentiometer can even be used to digitally control the audio volume of your Raspberry Pi by writing software instead of conventional analog audio signal processing.  Integrated ADC121C021 12-Bit analog-to-digital converter allows up to 9 devices to chain to a single I2C bus, capable of reading 4096 positions per potentiometer.

Applications:

  • Light Dimming
  • Motor Speed Control
  • Volume and Tone Controls
  • Medical Instruments
  • Test Equipment
  • Automotive

All I2C Mini Modules are designed to operate at 5VDC. Using a convenient 4-Pin plug, devices can be daisy-chained onto the I2C Bus, eliminating the need for soldering. Simply plug together the devices you need for your next automation application.

Pull-up resistors are included with all NCD master devices. If you are wiring in your own I2C port, on-board 4.7K jumper-selectable pull-up resistors are available for convenience purposes.

What is the NCD I2C Interface?

NCD is the creator of plug and play modular hardware using the NCD I2C Interface connector standard.  NCD I2C devices allow you to chain together several devices on the I2C bus, and communicate to each device individually at high speed (subject to the limitations of I2C).  The NCD I2C Interface uses a standard 4-Pin I2C Input and I2C Output connector.  NCD I2C devices communicate 5V I2C data and provides 5V DC power through this connector.  NCD I2C devices use standard I2C communications for all data transport, which is supported by nearly every microcontroller in production today.  The NCD I2C Interface is strictly a 5V standard, which is ideal for transport across longer cables.  NCD I2C devices always include a 6″ (152mm) 4-conductor I2C cable.  NCD I2C Mini Modules always include a 3″ (76mm) 4-conductor I2C cable.  Cables and connectors are available separately for designers who would like to include their own NCD I2C Interface into their designs.

Plug and Play Connectivity

NCD I2C devices will plug in to any available NCD I2C Output.  This includes just about everything we make in the NCD IoT Category, including all NCD IoT devices.  We also manufacture a wide range of I2C adapters that make it easy to plug NCD I2C Devices directly into most computing platforms.  The NCD I2C Interface adapters are available for Arduino, Banana Pi, BeagleBone, Bluz, C.H.I.P., ESP8266, Onion Omega, Particle Photon and Electron, PyCom, Raspberry Pi, 2, 3, and Zero, and Windows.  We are always working to add new platform support for NCD I2C devices.  NCD I2C Interface devices are compatible with just about everything in the microcontroller industry.

Unlimited I2C Expansion

Based on our plug-and-play I2C interface standard, all NCD I2C devices are equipped with a I2C output port, making it easy to expand to a wide variety of sensors, current monitors, relay controllers, PWM controllers, and much more!  We are always designing new expansions for our modular plug-and-play I2C framework.  We are dedicated to building a product line of interconnected devices to simplify all forms of automation.  Re-use or upgrade your hardware in seconds by selecting the modules that best fit your needs, and chaining them together using the included I2C expansion cables!

Powering NCD I2C Interface Devices

Some NCD I2C devices require a external power supply, others may be powered through the 4-Pin I2C bus connector at 5VDC, and other devices are jumper selectable between external and I2C bus power.  All I2C mini modules are powered through the 5V I2C bus connector, greatly simplifying connectivity.

Features

  • Digitally Read Potentiometer Position over an I2C Bus
  • Integrated Potentiometer
  • ADC121C021 ADC with 12-Bit Resolution
  • Up to 9 Devices per I2C Interfaces
  • Up to 188k Samples per Second
Related links to "ADC121 Potentiometer Input I2C Mini Module"
Read, write and discuss reviews... more
Customer evaluation for "ADC121 Potentiometer Input I2C Mini Module"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed