Prices incl. VAT plus shipping costs
Out of Stock
- Order number: NCD-PR33-20
- Manufacturer product ID: PR33-20
This is a 4 Channel I2C Optically isolated digital input board. This board has an I2C digital IO expander chip PCA9536. The PCA9536 Digital IO pins are connected to the optocouplers. These optocouplers provide 3.7kVdc Isolation which makes it ideal for industrial digital Inputs. This 4 channel digital isolated input board has an on-board 5V switcher power supply. It has a barrel connector and a screw terminal for power input. All 4 Optically isolated inputs accept high-level logic from 3V to 24V. It is possible to increase the input voltage by simply adding more resistance in series with the input signal.
This board comes with an I2C interface, if you are looking for optically isolated board to interface with Raspberry Pi, BeagleBone, Arduino, Onion Omega or any major platforms you can use this board with one of our platform adapters.
What is the NCD I2C Interface?
NCD is the creator of plug and play modular hardware using the NCD I2C Interface connector standard. NCD I2C devices allow you to chain together several devices on the I2C bus, and communicate to each device individually at high speed (subject to the limitations of I2C). The NCD I2C Interface uses a standard 4-Pin I2C Input and I2C Output connector. NCD I2C devices communicate 5V I2C data and provides 5V DC power through this connector. NCD I2C devices use standard I2C communications for all data transport, which is supported by nearly every microcontroller in production today. The NCD I2C Interface is strictly a 5V standard, which is ideal for transport across longer cables. NCD I2C devices always include a 6″ (152mm) 4-conductor I2C cable. NCD I2C Mini Modules always include a 3″ (76mm) 4-conductor I2C cable. Cables and connectors are available separately for designers who would like to include their own NCD I2C Interface into their designs.
Plug and Play Connectivity
NCD I2C devices will plug in to any available NCD I2C Output. This includes just about everything we make in the NCD IoT Category, including all NCD IoT devices. We also manufacture a wide range of I2C adapters that make it easy to plug NCD I2C Devices directly into most computing platforms. The NCD I2C Interface adapters are available for Arduino, Banana Pi, BeagleBone, Bluz, C.H.I.P., ESP8266, Onion Omega, Particle Photon and Electron, PyCom, Raspberry Pi, 2, 3, and Zero, and Windows. We are always working to add new platform support for NCD I2C devices. NCD I2C Interface devices are compatible with just about everything in the microcontroller industry.
Unlimited I2C Expansion
Based on our plug-and-play I2C interface standard, all NCD I2C devices are equipped with a I2C output port, making it easy to expand to a wide variety of sensors, current monitors, relay controllers, PWM controllers, and much more! We are always designing new expansions for our modular plug-and-play I2C framework. We are dedicated to building a product line of interconnected devices to simplify all forms of automation. Re-use or upgrade your hardware in seconds by selecting the modules that best fit your needs, and chaining them together using the included I2C expansion cables!
Powering NCD I2C Interface Devices
Some NCD I2C devices require a external power supply, others may be powered through the 4-Pin I2C bus connector at 5VDC, and other devices are jumper selectable between external and I2C bus power. All I2C mini modules are powered through the 5V I2C bus connector, greatly simplifying connectivity.
- 4 Optically Isolated Digital Inputs
- 37250(RMS) Isolation Voltage
- High Speed I2C Interface PCA9536
- Ideal for Sensor and Industrial Inputs
- Onboard Switching Power Supply
- Inverse Polarity Protection
- Screw Terminal for Easy Installation
- Operating Power Supply Range 6.5V-32V DC