Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: Phidgets-1014_2B
This board has 4 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.
The PhidgetInterfaceKit 0/0/4 allows you to control high power devices such as incandescent light bulbs, fans, and pumps by electronically switching power on and off.
The 1014 has 4 Relay Outputs for switching AC or DC power; the relays are Single Pole Double Throw (SPDT).
Note: This board is not suitable for switching signals. It takes at least 100mA of current to bridge the oxide layer that forms on the relay contacts, and most signals will not meet this requirement. If you need to switch signals, check out the 1017 - PhidgetInterfaceKit 0/0/8.
|API Object Name||InterfaceKit|
|Switching Speed Max||20 cpm|
|Recommended Wire Size||12 - 24 AWG|
|Operating Temperature Min||0 °C|
|Operating Temperature Max||70 °C|
|Controlled By||USB (Mini-USB)|
|API Object Name||DigitalOutput|
|Dielectric Strength||1.5 kV AC|
|Contact Resistance Max||120 mΩ|
|Load Voltage Max (DC)||* 30 V DC|
|Load Voltage Max (AC)||277 V AC|
|Load Current Min||100 mA|
|Load Current Max (DC)||7 A|
|Load Current Max (AC)||12 A|
|Turn-on Time Max||10 ms|
|Turn-off Time Max||10 ms|
|Current Consumption Min||14 mA|
|Current Consumption Max||300 mA|
|USB Speed||Low Speed|