Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: Phidgets-3052_1
- Manufacturer product ID: 3052_1
Rated for 28VAC/2.5amp or 40VDC/2.5amp switching, this SSR is controlled by a digital output.
Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion. By simply providing a small voltage to the control side of the circuit, you can open or close a higher powered circuit on the load side.
The SSR Board is safe to use with sensitive control devices like microprocessors, and will not damage a Phidget device or your PC. Optoisolation between the control inputs and outputs of the SSR in the form of an LED paired with a set of optically-controlled MOSFETs provides protection from output to input. An on-board diode across the relay output protects the board from static electricity and surges from inductive loads.
Product Specifications
| Board | |
|---|---|
| Controlled By | Digital Output (5V) |
| Electrical Properties | |
| Relay Output Type | MOSFET |
| Isolation Method | Photoelectric |
| Dielectric Strength | 1.5 kV AC |
| Control Voltage Min | 3 V DC |
| Control Voltage Max | 30 V DC |
| Control Current | 10 mA |
| Load Voltage Max (DC) | 40 V DC |
| Load Voltage Max (AC) | 28 V AC |
| Load Current Max (AC) | 2.5 A |
| Load Current Max (DC) | 2.5 A |
| Turn-on Time Max | 5 ms |
| Turn-off Time Max | 0.2 ms |
| Contact Resistance Max | 50 mΩ |
| Physical Properties | |
| Recommended Wire Size (Load) | 16 - 26 AWG |
| Recommended Wire Size (Control) | 16 - 26 AWG |
| Operating Temperature Min | -40 °C |
| Operating Temperature Max | 85 °C |