172:1 Metal Gearmotor 25Dx56L mm with 48 CPR Encoder

₹3,149.00 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • Pololu-2288
  • 2288
  This gearmotor consists of a  low-power, 6 V  brushed DC motor combined... more
Product information "172:1 Metal Gearmotor 25Dx56L mm with 48 CPR Encoder"

 

This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 171.79:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 8245.92 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.

Key specifications:

voltageno-load performancestall extrapolation
6 V 34 RPM, 250 mA 14.5 kg⋅cm (200 oz⋅in), 2.4 A

These cylindrical brushed DC gearmotors are available in a wide range of gear ratios and with five different motors (two power levels of 6 V motors and three power levels of 12 V motors). The gearmotors all have the same 25 mm diameter case and 4 mm diameter gearbox output shaft, so it is generally easy to swap one version for another if your design requirements change (though the length of the gearbox tends to increase with the gear ratio). All versions are also available with an integrated 48 CPR quadrature encoder on the motor shaft.

Details for item #2288

Exact gear ratio: 22×20×22×22×22×22×2412×12×10×10×10×10×10≈171.79:1

Dimensions

The diagram below shows the dimensions of the 25D mm line of gearmotors (units are mm over [inches]). This diagram is also available as a downloadable PDF (223k pdf).

 

Dimensions of the Pololu 25D mm metal gearmotors. Units are mm over [inches].

Warning: Do not screw too far into the mounting holes as the screws can hit the gears. We recommend screwing no further than 6 mm (0.24″) into the screw hole.

Gearmotor accessories

The face plate has two mounting holes threaded for M3 screws. You can use our custom-designed 25D mm metal gearmotor bracket (shown in the picture below) to mount the gearmotor to your project via these mounting holes and the screws that come with the bracket.

Pololu 25D mm metal gearmotor bracket pair.

Pololu 25D mm gearmotor with bracket.

 

 

Related links to "172:1 Metal Gearmotor 25Dx56L mm with 48 CPR Encoder"
Read, write and discuss reviews... more
Customer evaluation for "172:1 Metal Gearmotor 25Dx56L mm with 48 CPR Encoder"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed