Close filters
 
  •  
from to
1 From 44
No results were found for the filter!
NEW
Optical Detector / Phototransistor - QRD1114
Optical Detector / Phototransistor - QRD1114
Description This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm)....
₹89.00 *
NEW
SparkFun Weather Shield
SparkFun Weather Shield
Description The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as...
₹3,959.00 *
NEW
Micro:bit Board
Micro:bit Board
The BBC micro:bit is a pocket-sized computer that lets you get creative with digital technology. Each order contains just the micro:bit board. You can code, customize and control your micro:bit from anywhere! You can use your micro:bit...
₹1,499.00 *
NEW
SparkFun UV Sensor Breakout - ML8511
SparkFun UV Sensor Breakout - ML8511
Description The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 Sensor works by outputing an analog signal in relation to the amount of UV light that’s detected. This breakout can be very handy in creating devices...
₹1,169.00 *
NEW
SparkFun LilyPad XBee
SparkFun LilyPad XBee
The LilyPad XBee is a breakout board for the popular XBee modules that can be sewn into your e-textile projects to provide them with a little “connectivity.” This board includes easy-to-sew tabs and all the necessary power regulation to...
₹1,479.00 *
NEW
SparkFun MyoWare Cable Shield
SparkFun MyoWare Cable Shield
Description The MyoWare Muscle Sensor is now designed to be wearable, allowing you to attach biomedical sensor pads directly to the board itself. However, there still may be cases where you want to mount the sensor pads away from the...
₹489.00 *
NEW
SparkFun LilyPad ProtoSnap Plus
SparkFun LilyPad ProtoSnap Plus
The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap Plus is easy with...
₹3,959.00 *
NEW
SparkFun Spectral Sensor Breakout - AS7263 NIR (Qwiic)
SparkFun Spectral Sensor Breakout - AS7263 NIR...
Description The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and characterize how different materials absorb and reflect different...
₹2,569.00 *
NEW
SparkFun Spectral Sensor Breakout - AS7262 Visible (Qwiic)
SparkFun Spectral Sensor Breakout - AS7262...
Description The SparkFun AS7262 Visible Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and characterize how different materials absorb and reflect different wavelengths of...
₹2,569.00 *
NEW
SparkFun Qwiic HAT for Raspberry Pi
SparkFun Qwiic HAT for Raspberry Pi
Description The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic HAT connects the I 2 C bus...
₹589.00 *
NEW
SparkFun MyoWare LED Shield
SparkFun MyoWare LED Shield
The MyoWare LED Shield is designed to pair with the MyoWare Muscle Sensor. The blue 10-segment bar graph shows the magnitude of the measured signal. The more muscle activation measured, the higher up the board the lit LEDs will go. With...
₹2,669.00 *
NEW
Stackable Header - 3 Pin (Female, 0.1")
Stackable Header - 3 Pin (Female, 0.1")
Description This is a simple 3 pin female PTH header. This header is in a configuration that makes it ideal to be used with the MyoWare Muscle Sensor line. Each pin has a spacing of 0.1" in between each other. Documents Datasheet
₹49.00 *
1 From 44
Viewed