Top seller
No results were found for the filter!
BIOLOID AX Compatible Metal F3 Bracket The BIOLOID Compatible Metal F3 Bracket is an aluminum replacement for the standard BIOLOID F3 bracket . 4 tapped holes on the top of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹559.00 *
BIOLOID AX Compatible Metal F4 Bracket The BIOLOID Compatible Metal F4 Bracket is an aluminum replacement for the standard BIOLOID F4 bracket . 12 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹559.00 *
BIOLOID AX Compatible Metal F5 Bracket The BIOLOID Compatible Metal F4 Bracket is a aluminum replacement for the standard BIOLOID F4 bracket . 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹559.00 *
PhantomX Pan Tilt(AX-12A) The Phantom X Pan Tilt kit is an entry level pan tilt kit using the wildly popular Bioloid smart servos. With a resolution of 0.29°, rotation range of up to 300°, and speed up to 97rpm (0.103 sec/60°) you get a lot of performance for a...
₹11,199.00 *
WidowX MX-28 Pan Tilt Kit The WidowX Pan Tilt kit is a mid level pan tilt kit using the wildly popular MX-28 DYNAMIXEL smart servos. With a resolution of 0.088°, rotation range of 360°, stall torque of 25.5 kg·cm, and speed of 55rpm you get tremendous resolution...
₹55,999.00 *
ScorpionX MX-64 Pan Tilt The WidowX Pan Tilt kit is a mid level pan tilt kit using the wildly popular MX-64 DYNAMIXEL smart servos. With a resolution of 0.088°, rotation range of 360°, stall torque of 74 kg·cm, and speed of 78rpm you get tremendous resolution...
₹78,999.00 *
LiPo/Li-ion Battery Wiring Harness Easily link your project to a LiPo/Li-ion battery with the Battery Wiring Harness ! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo/Li-ion Batteries and the...
₹999.00 *
ArbotiX Commander v2.0 Kit The ArbotiX Commander v2.0 is an Arduino compatible, open-source XBEE-wireless hand-held controller built specifically for controlling ArbotiX/NUKE powered walking robots (but it can be interfaced to virtually any microcontroller or PC)....
₹6,999.00 *
3 Pin DYNAMIXEL Cable Variety Pack The 3 Pin DYNAMIXEL Cable Variety Pack is a great solution to building upon your existing, or creating a new project! The pack includes 5 different lengths of 3 pin cables- 60mm, 100mm, 150mm, 200mm, and 250mm. The 3 Pin DYNAMIXEL Cable...
₹5,489.00 *
6 Port AX/MX Power Hub The 6 Port AX/MX Power Hub is a must have accessory for any DYNAMIXEL user. This little board is a Bioloid 6 Port Hub and a SMPS adaptor all in one! The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring...
₹899.00 *
100mm 3 Pin DYNAMIXEL Compatible Cable 10 Pack It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for,...
₹1,309.00 *
200mm 3 Pin DYNAMIXEL Compatible Cables -10 Pack It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for,...
₹1,559.00 *
PhantomX WidowX MX-28 BIOLOID AX 250mm 3 Pin 3 Pin DYNAMIXEL LoCoBot WX250 BIOLOID AX BIOLOID AX ViperX 300 200mm 3 Pin WidowX MX-28 ReactorX 200 500mm 3 Pin ArbotiX PhantomX 100mm 3 Pin ScorpionX MX-64 LiPo Li-ion WidowX 200 PhantomX MX-64 106 6 Port AX MX PincherX 100 PhantomX 350mm 3 Pin ViperX 250 PincherX 150 Interbotix BIOLOID AX BIOLOID AX PhantomX Pan MX-64 106 Interbotix ReactorX 150 PhantomX Metal WidowX 250
Viewed