Product information "600x448, 5.83inch E-Ink display HAT for Raspberry Pi"
This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Operating voltage: 3.3V~5V
Outline dimension: 125.40mm × 99.50mm
Display size: 118.80mm × 88.26mm
Dot pitch: 0.198 × 0.197
Resolution: 600 × 448
Display color: black, white
Grey level: 2
Full refresh time: 3.5s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°
SPI MOSI pin
SPI SCK pin
SPI chip selection, low active
Data/Command selection (high for data, low for command)
External reset, low active
Busy status output, low active
5.83inch e-Paper x1
e-Paper Driver HAT x1
RPi screws pack (2pcs) x1
PH2.0 20cm 8Pin x1
Related links to "600x448, 5.83inch E-Ink display HAT for Raspberry Pi"