1200x825, 9.7inch E-Ink display HAT for Raspberry Pi

Please inform me as soon as the product is available again.
Please enter these characters in the following text field.
₹17,509.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • Waveshare-15195
  • 15195
1200x825, 9.7inch E-Ink display HAT for Raspberry Pi, IT8951 controller, USB/SPI/I80/I2C... more
Product information "1200x825, 9.7inch E-Ink display HAT for Raspberry Pi"

1200x825, 9.7inch E-Ink display HAT for Raspberry Pi, IT8951 controller, USB/SPI/I80/I2C interface.

This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/STM32)

Specifications

  • Operating voltage: 5V
  • Interface: USB/SPI/I80/I2C
  • Outline dimension: 218.8mm × 156.425mm × 1.15mm
  • Display size: 202.8mm × 139.425mm
  • Dot pitch: 0.169 × 0.169
  • Resolution: 1200 × 825
  • Display color: black, white
  • Gray scale: 2-16 (1-4 bit)
  • Full refresh time: <1s
  • Total refresh power: 0.6W(typ.)
  • Total standby power: 0.3W(typ.)
  • Viewing angle: >170°

SPI Pinouts

SymbolDescription
5V Power input
GND Ground
MISO SPI MISO pin
MOSI SPI MOSI pin
SCK SPI SCK pin
CS SPI chip selection, low active
RST External reset, low active
HRDY Busy status output, low active

e-Paper IT8951 Driver HAT Dimensions

9.7inch e-Paper HAT e-Paper IT8951 Driver HAT dimensions

PACKAGE CONTENT

  1. 9.7inch e-Paper x1
  2. e-Paper IT8951 Driver HAT x1
  3. 9.7inch e-Paper Adapter x1
  4. 33PIN FFC (same side contact) x1
  5. USB type A plug to micro B plug cable x1
  6. PH2.0 20cm 8Pin x1
  7. RPi screws pack (2pcs) x1

 

Related links to "1200x825, 9.7inch E-Ink display HAT for Raspberry Pi"
Read, write and discuss reviews... more
Customer evaluation for "1200x825, 9.7inch E-Ink display HAT for Raspberry Pi"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed