212x104, 2.13inch flexible E-Ink display HAT for Raspberry Pi

Please inform me as soon as the product is available again.
Please enter these characters in the following text field.
₹2,079.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • Waveshare-15084
  • 15084
212x104, 2.13inch flexible E-Ink display HAT for Raspberry Pi, black/white dual-color, SPI... more
Product information "212x104, 2.13inch flexible E-Ink display HAT for Raspberry Pi"

212x104, 2.13inch flexible E-Ink display HAT for Raspberry Pi, black/white dual-color, SPI interface.

This is a flexible E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Compared with normal e-Paper panels, this flexible panel allows bending without being damaged, and it's thinner and lighter.

Combined with the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications where curved surface display is required, such as industrial instruments, smart wearable-devices, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

  • Operating voltage: 3.3V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 59.2mm × 29.2mm × 0.3mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.229 × 0.228
  • Resolution: 212 × 104
  • Display color: black, white
  • Grey level: 2
  • Full refresh time: 2s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Interface

SymbolDescription
VCC 3.3V / 5V
GND Ground
NC NC
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active

PACKAGE CONTENT

  1. 2.13inch e-Paper (D) x1
  2. e-Paper Driver HAT x1
  3. RPi screws pack (2pcs) x1
  4. PH2.0 20cm 8Pin x1

Dimensions

2.13inch e-Paper HAT (D) dimensions

 

Related links to "212x104, 2.13inch flexible E-Ink display HAT for Raspberry Pi"
Read, write and discuss reviews... more
Customer evaluation for "212x104, 2.13inch flexible E-Ink display HAT for Raspberry Pi"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed