Products from DF Robot (DFR)
No results were found for the filter!
Romeo BLE - Arduino Robot Control Board with...
INTRODUCTION Romeo family is an All-in-One Arduino based control board especially designed for robotics applications from DFRobot. It benefits from the Arduino open source platform, it is supported by thousands of open source codes, and...
₹3,919.00 *
Super Capacitor - 100F/2.7V
INTRODUCTION This is a 100 Farad capacitor. Combine two in series for 50F/5.4V. Our testing told us that two of these can power Arduino for 4 hours (with one LED). And you can recharge the capacitor just within 30 seconds. It can be used...
₹1,189.00 *
Input Shield for Arduino
INTRODUCTION The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons (Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module (SKU:TEL0005) interface and the...
₹1,449.00 *
WiDo - Open Source IoT Node (Arduino Compatible)
INTRODUCTION Wido is an Arduino compatible WIFI IoT Node development board, which integrates with WG1300 WIFI solution. The microcontroller of Wido is ATMEL ATmega32U4. Wido are compatible with copious amounts of Arduino and periphery...
₹2,689.00 *
Capacitive Touch Kit For Arduino
INTRODUCTION DFRobot introduces the DFRobot Capacitive Touch Kit For Arduino . This kit comes with three types touch sensors, an ipod style wheel touch, a keypad touch which supports backlit and a grid touch pad which can recognize...
₹1,929.00 *
Xbee Shield for Arduino
INTRODUCTION The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs. The module is easy to use, low power consumption, and the provision of critical data between...
₹1,069.00 *
Gravity: Dual Bipolar Stepper Motor Shield for...
INTRODUCTION Do you want to do some projects with stepper motors such as an auto curtain, a XY Plotter, or a 3D printer? Generally, it's not an easy thing to drive stepper motor(s) with Arduino; but with this stepper motor shield, you...
₹3,259.00 *
Hurt Locker (Fake Defusable Bomb) Kit
INTRODUCTION Time to be a hero! As one of the DFRobot classics, the Hurt Locker Kit allows you to make a scary looking time bomb that you can actually "defuse" with wisdom and courage. It is based on Arduino and is very fun to play,...
₹6,349.00 *
Barcode Reader/Scanner Module - CCD Camera
INTRODUCTION This Barcode Reader/Scanner Module with CCD Camera is a perfect choice for your OEM design. It brings the benefits of barcode scanning to all types of OEM devices. You will be able to use this cutting-edge scanning...
₹4,649.00 *
MicroSD card module for Arduino
INTRODUCTION This is a Micro SD(TF) module from DFRobot. It is compatible with TF SD card (commonly used in Mobile Phone) which is the most tiny card in the market. SD module has various applications such as data logger, audio, video,...
₹519.00 *
Accessory Shield for Bluno
INTRODUCTION Accessory Shield for experimentation Ideal prototyping platform for developers Seven built-in modules 128x64 OLED screen The Accessory Shield for Bluno is specially made for the Bluno (BLE with Arduino Uno) microcontroller,...
₹2,479.00 *
RGB LED Strip Driver Shield v1.0
INTRODUCTION Want to program your RGB LED strip to be a bit more "rhythmic" or "unpredictive"? This RGB LED Strip Shield contains all the components you need to build a super cool RGB (or other three channel) LED project with your...
₹1,199.00 *
Gaussmeter Nvidia Jetson Kria KR260 New Tracked Opentherm to 2V 1W Thin-film LoCoBot WX250 OAK-D-Lite Auto PYNQ-Z2 Basic ADC3 click Analog ROS based Robot OBDII click Google AIY 5inch SHT31 Humidity AK80-6 With Weather Station MySignals SW C2000 Delfino Atlas Pixhawk 4 - Google Coral JetRacer 60mm Aluminum Developer kit Breakout Kit 1-Channel Air quality 3 Google AIY PhantomX Analog 6 inch 152mm MCP2517FD click TurtleBot4 DYNAMIXEL Current and RUBIK LINK V2.0 Research Grade TURTLEBOT3 Basys 3 Artix-7 Robot Actuator DYNAMIXEL Leap Motion RUT200 Google Coral
Viewed