Arty Z7-20 With Zynq SDSoC Voucher: APSoC Zynq-7000 Development Board for Makers and Hobbyists

This product is currently not available.
Please inform me as soon as the product is available again.
Please enter these characters in the following text field.
₹25,159.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • DG-471-006
  • 471-006
The Arty Z7 is a ready-to-use development platform designed around the Zynq-7000™ All... more
Product information "Arty Z7-20 With Zynq SDSoC Voucher: APSoC Zynq-7000 Development Board for Makers and Hobbyists"

The Arty Z7 is a ready-to-use development platform designed around the Zynq-7000™ All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. This pairing grants the ability to surround a powerful processor with a unique set of software defined peripherals and controllers, tailored by you for whatever application is being conquered. The design process is very straightforward and provides a systematic path between defining your custom peripheral set and bringing it's functionality up to a Linux OS running on the processor. Digilent provides a number of materials and resources for the Arty Z7 that will get you up and running with this process quickly.

Features:

Arty Z7 comes in two FPGA variants: Arty Z7-10 features Xilinx XC7Z010-1CLG400C. Arty Z7-20 features the larger Xilinx XC7Z020-1CLG400C. Arty Z7 has the features listed below:

  Arty Z7-10 Arty Z7-20
FPGA part XC7Z010-1CLG400C XC7Z020-1CLG400C
1 MSPS On-chip ADC Yes Yes
Processor  Dual ARM Cortex A9 Dual ARM Cortex A9
Look-up Tables (LUTs) 17,600 53,200
Flip-flops 35,200 106,400
Block RAM 270 KB 630 KB
Clock Management Tiles 2 4
Available Shield I/O 26 49 
  • ZYNQ Processor

    • 650MHz dual-core Cortex-A9 processor

    • DDR3 memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports

    • High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO

    • Low-bandwidth peripheral controller: SPI, UART, CAN, I2C

    • Programmable from JTAG, Quad-SPI flash, and microSD card

    • Programmable logic equivalent to Artix-7 FPGA

  • Memory

    • 512MB DDR3 with 16-bit bus @ 1050Mbps

    • 16MB Quad-SPI Flash with factory programmed 48-bit globally unique EUI-48/64™ compatible identifier

    • microSD slot

  • Power

    • Powered from USB or any 7V-15V external power source

  • USB and Ethernet

    • Gigabit Ethernet PHY

    • USB-JTAG Programming circuitry

    • USB-UART bridge

    • USB OTG PHY (supports host only) 

  • Audio and Video

    • HDMI sink port (input)

    • HDMI source port (output)

    • PWM driven mono audio output with 3.5mm jack 

  • Switches, Push-buttons, and LEDs

    • 4 push-buttons

    • 2 slide switches

    • 4 LEDs

    • 2 RGB LEDs

  • Expansion Connectors

    • Two standard Pmod ports

      • 16 Total FPGA I/O

    • Arduino/chipKIT Shield connector

      • Up to 49 Total FPGA I/O (see table above)

      • 6 Single-ended 0-3.3V Analog inputs to XADC

      • 4 Differential 0-1.0V Analog inputs to XADC

What's Included:

  • Arty Board Zynq 7000 APSoC: choose between the Arty Z7-10 and Arty Z7-20
  • Digilent cardboard packaging with protective foam

 

Related links to "Arty Z7-20 With Zynq SDSoC Voucher: APSoC Zynq-7000 Development Board for Makers and Hobbyists"
Read, write and discuss reviews... more
Customer evaluation for "Arty Z7-20 With Zynq SDSoC Voucher: APSoC Zynq-7000 Development Board for Makers and Hobbyists"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed