The High Speed Logic Probes come in a pack of four twisted cables. Each cable has a GND (black) wire twisted to a DIN_USR (colored) wire. The wire connects to the High Speed Adapter via a 2-pin female header, and two 1-pin female connectors to the device under test. A 100Ω resistor is embedded in the signal wire on the end closest to the device under test. All GND wires should be connected to ground of the device under test.
Ships in a pack of four.
Provides sample rates of up to 800MS/s on the Digital Discovery.
GND (black) wire twisted to a DIN_USR (colored)
Connects to the High Speed Adapter via 2-pin female header
Connects to the device being tested via two 1-pin female connectors