Easy8051 v6

₹14,599.00 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • MIKROE-455
  • MIKROE-455
  Easy8051 v6 The Easy8051 v6 is compatible with 14-, 16-, 20-, 28-, 40-pin PLCC44... more
Product information "Easy8051 v6"


Easy8051 v6

The Easy8051 v6 is compatible with 14-, 16-, 20-, 28-, 40-pin PLCC44 and PLCC32 MCUs. It comes with an AT89S8253. The board has a USB 2.0 programmer and many peripherals such as port expander, MENU and 4x4 keypads etc.

In-Circuit Debugger

On-board USB 2.0 Programmer is driven by a single USB port on a PC. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies the driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP). This USB programmer doesn't use a bootloader or any similar software for programming. The whole 8051 memory and all pins are available to you. This is a USB 8051 InSystem programmer ideal for your future projects. Note: This programmer supports only 8051 microcontrollers with SPI Serial Interface for Program Downloading.



System provides support for MCUs in DIP14, DIP16, DIP20, DIP28, DIP40, PLCC44 and PLCC32 pin packages.


The graphic LCD 128x64 and LCD 2x16 (LCD2x16 is included) can be easily connected via the on-board connectors. The board features four 7-segment displays in multiplex mode.

Communication and Interfaces

RS-232 communication is enabled via DB9 connector and MAX232 level converters.

PORTs, buttons and LEDs

38 push buttons and 38 LEDs are connected to all microcontrollers pins. DIP switch is used to separate port pins from pull-up/pull-down resistors.

Package Contains

  • Easy8051 v6 development system
  • USB cable
  • 2x16 LCD display
  • Documentation


Applications Developing and testing firmware, creating prototypes, learning embedded programming
Displays On-board Seven-segment displays. Also supports GLCD 128x64 and LCD 2x16.
Architecture AVR (8-bit)
MCU Comes with an AT89S8253
On-board modules A/D converter MCP3204 with a potentiometer, 38 LEDs and push buttons
Programming On-board USB programmer for 8051
Expandability 1 x IDC10 header for each PORT
Input Voltage 5V (via USB) or 9-32V AC, 7-23V DC (via adapter)


Related links to "Easy8051 v6"
Read, write and discuss reviews... more
Customer evaluation for "Easy8051 v6"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.