Analog Devices AD5252 Digital Potentiometer 2-Channel 256-Position I2C Mini Module

Please inform me as soon as the product is available again.
Please enter these characters in the following text field.
₹3,289.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • NCD-PR1-31-MP
  • PR1-31-MP
  The AD5252 (from Analog Devices) offers an ideal solution for most digital... more
Product information "Analog Devices AD5252 Digital Potentiometer 2-Channel 256-Position I2C Mini Module"

 

The AD5252 (from Analog Devices) offers an ideal solution for most digital potentiometer applications. Learn how to use the AD5252 using our I2C Mini Module and take control of 2 on-board I2C controlled potentiometers, each with 256 taps. Choose from 1K, 10K, 50K, or 100K versions during ordering. The AD5252 supports wiper read-back, allowing you to easily read the current wiper settings.

Digital potentiometers are an ideal solution to replace many types of mechanical potentiometers, but we advise close examination of the datasheet to make sure your application is voltage compatible with the AD5252.

The AD5252 may also be used in:

  • programmable gain/offset control applications,
  • programmable power supplies,
  • programmable filters,
  • low-resolution digital-to-analog conversion,
  • LED brightness adjustment, and
  • sensor calibration applications.

The AD5252 is strictly limited to 5ma of current through each potentiometer. Voltages through the AD5252 potentiometers should NEVER exceed +5VDC at 5ma.

All I2C Mini Modules are designed to operate at 5VDC. Using a convenient 4-Pin plug, devices can be daisy-chained onto the I2C Bus, eliminating the need for soldering. Simply plug together the devices you need for your next automation application.

Pull-up resistors are included with all NCD master devices. If you are wiring in your own I2C port, on-board 4.7K jumper-selectable pull-up resistors are available for convenience purposes.

What is the NCD I2C Interface?

NCD is the creator of plug and play modular hardware using the NCD I2C Interface connector standard.  NCD I2C devices allow you to chain together several devices on the I2C bus, and communicate to each device individually at high speed (subject to the limitations of I2C).  The NCD I2C Interface uses a standard 4-Pin I2C Input and I2C Output connector.  NCD I2C devices communicate 5V I2C data and provides 5V DC power through this connector.  NCD I2C devices use standard I2C communications for all data transport, which is supported by nearly every microcontroller in production today.  The NCD I2C Interface is strictly a 5V standard, which is ideal for transport across longer cables.  NCD I2C devices always include a 6″ (152mm) 4-conductor I2C cable.  NCD I2C Mini Modules always include a 3″ (76mm) 4-conductor I2C cable.  Cables and connectors are available separately for designers who would like to include their own NCD I2C Interface into their designs.

Plug and Play Connectivity

NCD I2C devices will plug in to any available NCD I2C Output.  This includes just about everything we make in the NCD IoT Category, including all NCD IoT devices.  We also manufacture a wide range of I2C adapters that make it easy to plug NCD I2C Devices directly into most computing platforms.  The NCD I2C Interface adapters are available for Arduino, Banana Pi, BeagleBone, Bluz, C.H.I.P., ESP8266, Onion Omega, Particle Photon and Electron, PyCom, Raspberry Pi, 2, 3, and Zero, and Windows.  We are always working to add new platform support for NCD I2C devices.  NCD I2C Interface devices are compatible with just about everything in the microcontroller industry.

Unlimited I2C Expansion

Based on our plug-and-play I2C interface standard, all NCD I2C devices are equipped with a I2C output port, making it easy to expand to a wide variety of sensors, current monitors, relay controllers, PWM controllers, and much more!  We are always designing new expansions for our modular plug-and-play I2C framework.  We are dedicated to building a product line of interconnected devices to simplify all forms of automation.  Re-use or upgrade your hardware in seconds by selecting the modules that best fit your needs, and chaining them together using the included I2C expansion cables!

Powering NCD I2C Interface Devices

Some NCD I2C devices require a external power supply, others may be powered through the 4-Pin I2C bus connector at 5VDC, and other devices are jumper selectable between external and I2C bus power.  All I2C mini modules are powered through the 5V I2C bus connector, greatly simplifying connectivity.

Features

  • Two Digital Potentiometers
  • Choose from 1K, 10K, 50K, or 100K
  • +5V 5ma Handling per Potentiometer
  • I2C Mini Module Form Factor
  • 400 KHz Communication Speed
  • Add up to 4 of these per I2C Port
  • 0x2C I2C Start Address
  • Modular AD5252 breakout board
Related links to "Analog Devices AD5252 Digital Potentiometer 2-Channel 256-Position I2C Mini Module"
Read, write and discuss reviews... more
Customer evaluation for "Analog Devices AD5252 Digital Potentiometer 2-Channel 256-Position I2C Mini Module"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed