I2C Shield for WiPy2 & LoPy With USB Programming Port

The LoPyI2C is a general-purpose I2C Interface Adapter for the Pycom WiPy2/LoPy. This adapter provides a Micro USB Interface for power and programming the WiPy2/LoPy. A onboard level-shifter is included to convert the WiPy2/LoPy I2C Interface to our 5V standard.

The LoPyI2C allows the WiPy2/LoPy to connect to hundreds of sensors, relay controllers, current monitoring devices, and a growing array of FET drivers.

The LoPyI2C is compatible with the WPKF Key Fob Receiver, allowing a Key Fob transmitter to control the I/O lines of the WiPy2/LoPy. This interface adapter is compatible with WiPy2/LoPy. Also compatible with the LPXB Communications Overlay Shield.

The I2C port 5V is controlled by a GPIO pin and can be turned on all the time depending on jumper selection. If you are using this with a battery then you can turn on and off the I2C port according to your needs.

I2C connections — GPIO13(SCL)/GPIO12(SDA)

For more information on the WiPy, check out: https://www.pycom.io/

Features

• Power & Program your Pycom WiPy2 & LoPy from USB
• Provides an I2C Expansion Port for Interface to NCD I2C Devices
• Compatible with the LPKF Key Fob Receiver Overlay Shield
• Easily Interface WiPy2 & LoPy to Hundreds of Sensors
• Use WiPy2 & LoPy to Control Relays and FETs
• Interface WiPy2 & LoPy to Energy Monitoring Devices
• Compatible with the LPXB XBee Overlay Shield
• Control sensors, Relays, Industrial IO With LoPyI2C & LoRa