8-Channel DC Current Monitor with I2C Interface

Please inform me as soon as the product is available again.
₹9,449.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • NCD-PR3-6
  • PR3-6
This DC Current Monitoring controller consists of ADS7828 12-bit analog-to-digital converter... more
Product information "8-Channel DC Current Monitor with I2C Interface"

This DC Current Monitoring controller consists of ADS7828 12-bit analog-to-digital converter connected to eight ACS712-05 hall-effect current sensors.  This controller uses I2C communications with a convenient I2C input and I2C output connectors for easy daisy-chaining. On-Board address jumpers allow device start address selection for up to four current monitoring controllers on a single I2C port.  To use this device, simply pass current through each pair of screw terminals and read the voltages on the ADS7828. The ADS7828 will return approximately 2.5V when 0 current is passed through the ACS712. Forward current will cause the ADS7828 to return values between 2.5 and 5VDC as current increases. Negative current will cause the ADS7828 to return values from 2.5 to 0 as current increases. In theory, this design could monitor AC, but our software currently supports DC only at this time.

What is the NCD I2C Interface?

NCD is the creator of plug and play modular hardware using the NCD I2C Interface connector standard.  NCD I2C devices allow you to chain together several devices on the I2C bus, and communicate to each device individually at high speed (subject to the limitations of I2C).  The NCD I2C Interface uses a standard 4-Pin I2C Input and I2C Output connector.  NCD I2C devices communicate 5V I2C data and provides 5V DC power through this connector.  NCD I2C devices use standard I2C communications for all data transport, which is supported by nearly every microcontroller in production today.  The NCD I2C Interface is strictly a 5V standard, which is ideal for transport across longer cables.  NCD I2C devices always include a 6″ (152mm) 4-conductor I2C cable.  NCD I2C Mini Modules always include a 3″ (76mm) 4-conductor I2C cable.  Cables and connectors are available separately for designers who would like to include their own NCD I2C Interface into their designs.

Plug and Play Connectivity

NCD I2C devices will plug in to any available NCD I2C Output.  This includes just about everything we make in the NCD IoT Category, including all NCD IoT devices.  We also manufacture a wide range of I2C adapters that make it easy to plug NCD I2C Devices directly into most computing platforms.  The NCD I2C Interface adapters are available for Arduino, Banana Pi, BeagleBone, Bluz, C.H.I.P., ESP8266, Onion Omega, Particle Photon and Electron, PyCom, Raspberry Pi, 2, 3, and Zero, and Windows.  We are always working to add new platform support for NCD I2C devices.  NCD I2C Interface devices are compatible with just about everything in the microcontroller industry.

Unlimited I2C Expansion

Based on our plug-and-play I2C interface standard, all NCD I2C devices are equipped with a I2C output port, making it easy to expand to a wide variety of sensors, current monitors, relay controllers, PWM controllers, and much more!  We are always designing new expansions for our modular plug-and-play I2C framework.  We are dedicated to building a product line of interconnected devices to simplify all forms of automation.  Re-use or upgrade your hardware in seconds by selecting the modules that best fit your needs, and chaining them together using the included I2C expansion cables!

Powering NCD I2C Interface Devices

Some NCD I2C devices require a external power supply, others may be powered through the 4-Pin I2C bus connector at 5VDC, and other devices are jumper selectable between external and I2C bus power.  All I2C mini modules are powered through the 5V I2C bus connector, greatly simplifying connectivity.


  • 8-Channels of DC Current Monitoring
  • 5-Amp Monitoring per Channel
  • 50-kHz Sampling Rate
  • 12-Bit Resolution per Channel
  • Allegro ACS712-05 Hall Effect Current Sensor
  • ADS7828 High-Speed 8-Channel I2C ADC
Related links to "8-Channel DC Current Monitor with I2C Interface"
Read, write and discuss reviews... more
Customer evaluation for "8-Channel DC Current Monitor with I2C Interface"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.