Prices incl. VAT plus shipping costs
Out of Stock
- Order number: Pololu-1475
- Manufacturer product ID: 1475
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 4.5 V, allowing for a holding torque of 14 kg-cm (190 oz-in).
This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 4.5 V, allowing for a holding torque of 14 kg-cm (190 oz-in). The motor has six color-coded wires terminated with bare leads that allow it to be controlled by both unipolar and bipolar stepper motor drivers. When used with a unipolar stepper motor driver, all six leads are used. When used with a bipolar stepper motor driver, the center-tap yellow and white wires can be left disconnected (the red-blue pair gives access to one coil and the black-green pair gives access to the other coil). We recommend using it as a bipolar stepper motor.
NEMA 23 stepper motor (item #1475) mounted with a steel L-bracket for NEMA 23 stepper motors.
Our 1/4″ universal mounting hub and 1/4″ scooter wheel adapter can be used to mount objects on the stepper motor’s 1/4″-diameter output shaft, and we carry a NEMA 23 steel bracket for securely mounting this stepper motor to a flat surface.
- Size: 56.4 mm square × 76 mm, not including the shaft (NEMA 23)
- Shaft diameter: 6.35 mm (0.25″) “D”
- Steps per revolution: 200
- Current rating: 2 A per coil
- Voltage rating: 4.5 V
- Resistance: 2.25 Ω per coil
- Holding torque: 14 kg-cm (190 oz-in)
- Inductance: 3.6 mH per coil
- Lead length: 30 cm (12″)
- Output shaft supported by two ball bearings
More specifications are available in the datasheet (39k pdf).
The following diagram shows the stepper motor dimensions in mm. The output D-shaft has a 0.25″ (6.35 mm) diameter with a section that is flattened by 0.5 mm. This shaft works with our 1/4″ universal mounting hub and 1/4″ scooter wheel adapter.
The inside of a bipolar stepper motor (SOYO NEMA 14-size).
Stepper Motor Applications
Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:
- CNC machines
- 3D printer/prototyping machines (e.g. RepRap)
- Laser cutters
- Pick and place machines
- Linear actuators
- Hard drives
Pololu’s assortment of stepper motors.
Note: This stepper motor is SOYO part number SY57STH76-2006A.
|Size:||56.4 mm square × 76 mm|
|Shaft diameter:||6.35 mm|
|Shaft type:||1/4 inch "D"|
|Current rating:||2000 mA|
|Voltage rating:||4.5 V|
|Holding torque:||190 oz·in|
|Steps per revolution:||200|
|Inductance per phase:||3.6 mH|
|Number of leads:||6|
|Lead length:||30 cm|
1. Not including the shaft.
2. Per coil.