250:1 Metal Gearmotor 20Dx46L mm 6V CB with Extended Motor Shaft

Please inform me as soon as the product is available again.
Please enter these characters in the following text field.
₹2,269.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • Pololu-3720
  • 3720
Overview These cylindrical brushed DC gearmotors are available in a wide range of gear... more
Product information "250:1 Metal Gearmotor 20Dx46L mm 6V CB with Extended Motor Shaft"

Overview

These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different motors: 6 V and 12 V motors with long-life carbon brushes (CB), and a 6 V motor with shorter-life precious metal brushes. All three motors offer similar performances at their respective nominal voltages, just with the 12 V motor drawing approximately half the current of the 6 V motor and with the carbon brush versions having longer lifetimes than the one with precious metal brushes.

These gearmotors are optionally available with an additional 2 mm-diameter output shaft that protrudes 6 mm from the rear of the motor (see the middle picture below). This rear shaft rotates at the same speed as the input to the gearbox and offers a way to add an encoder.The gearmotors all have 20 mm diameter gearboxes and 4 mm diameter gearbox output shafts, so it is generally easy to swap one version for another if your design requirements change (though the length of the gearbox tends to increase with the gear ratio).

Specification

Dimensions

Size: 20D × 47.7L mm1
Weight: 47 g
Shaft diameter: 4 mm2

General specifications

Gear ratio: 250:1
No-load speed @ 6V: 57 rpm
No-load current @ 6V: 0.15 A
Stall current @ 6V: 2.9 A3
Stall torque @ 6V: 12 kg·cm3
Max output power @ 6V: 1.8 W
Extended motor shaft?: Y
Long-life carbon brushes?: Y
Motor type: 2.9A stall @ 6V CB (carbon brush)

Performance at maximum efficiency

Max efficiency @ 6V: 28 %
Speed at max efficiency: 47 rpm
Torque at max efficiency: 2.1 kg·cm
Current at max efficiency: 0.62 A
Output power at max efficiency: 1.0 W

Notes:

  • Not including output shafts; output shafts add 24 mm to the total length.
  • D shaft.
  • Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
Related links to "250:1 Metal Gearmotor 20Dx46L mm 6V CB with Extended Motor Shaft"
Read, write and discuss reviews... more
Customer evaluation for "250:1 Metal Gearmotor 20Dx46L mm 6V CB with Extended Motor Shaft"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed