UniPi 1.1

Please inform me as soon as the product is available again.
Please enter these characters in the following text field.
₹17,879.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • UniPi-2014001
  • 2014001
UniPi 1.1 is an extension board for Raspberry Pi. Together they form a programmable... more
Product information "UniPi 1.1"

UniPi 1.1 is an extension board for Raspberry Pi. Together they form a programmable control unit for universal use in automation, regulation, and monitoring systems.

Package includes

  • UniPi 1.1 board
  • quick start guide
  • 26-pin (2×13) cable for connecting the Raspberry Pi computer (compatible with Raspberry Pi Model B+, Raspberry Pi 2 model B and Raspberry Pi 3 model B)
  • 3× metal spacer 2M5 (20mm)
  • 3× screw 2M5

Note: The package does not contain the Raspberry Pi computer, software license or DIN rail holder

Properties

  • Compatible with Raspberry Pi B+, Raspberry Pi 2 and Raspberry Pi 3
  • 8 × Finder 36.11.9.005.4011 changeover relays rated for 250V AC / 5A or 24V DC / 5A
  • 12 + 2* galvanically isolated digital inputs (5-24V DC voltage with a minimum pulse length of 5ms)
  • 2 × 0-10V analogue inputs
  • 1 × 0-10V analogue output
  • 1 × 1-Wire port for connection to 1-Wire thermometers and other sensors
  • 1 × I2C port for expansion
  • 1 × UART port for external serial communications
  • socket for battery powering RTC
  • connection with Raspberry Pi via a supplied ribbon cable
  • possible to extend via extension modules over I2C
  • possible to equip with DIN rail mounting and plastic cover
  • requires an external 5V 2.5A power supply with 2.1mm DC jack.

*Digital inputs 13 and 14 are not accessible by default. To use them, please follow this manual

UniPi 1.1 is an extension board for the Raspberry Pi computer, allowing it to serve as a programmable logic computer (PLC) in applications such as automation, regulation, monitoring, smart home systems, industrial automation and many more. It is a direct predecessor of the Neuron PLC line.. The board can be extended via an EMO-R8 extension module, adding another 8 relay outputs. Users can also purchase a DIN rail holder for installation into a distribution box and plastic protective cover.

UniPi 1.1 is compatible with a wide variety of software. For programming the UniPi we recommend either our open source API EVOK. or our advanced node-based control software, MervisEVOK is our official open-source application programming interface (API), designed for remote access to our control units. It represents a simple software allowing the user easy access to hardware without extensive programming. Mervis is then our primary, officially supported software platform for UniPi PLC management. It is an extensive set of tools for advanced monitoring and regulation, developed under the IEC 61131-3 programming standard. 

Digital inputs are designed for the reading of binary values (0/1, on/off, open/closed etc.) and are thus suitable for connecting switches, motion sensors, window or door magnetic locks etc.

Caution: The cable for connection of Raspberry Pi to the UniPi board does not contain wires for digital inputs 13 and 14. To use these inputs, it is necessary to create a custom connection according to this tutorial

Analogue inputs are used to read 0-10V voltage, making them suitable for reading values from analogue sensors such as temperature sensors, pressure meters, tensometers etc.

The analogue output can be used for control of external devices such as three-way valves or heat exchangers via 0-10V voltage or 0-20 mA

Relay outputs are designed for switching two-state devices via alternating or direct voltage. Relays thus can be used to switch boilers, water heaters, electric motors or other stronger relays.

Technical Parameter

Digital inputs 14
1-Wire bus Ano
Relay outputs 8
Analog inputs 2
Analog outputs 1
Power 5 V DC / 2.4 A
RTC battery socket Ano
Dimensions 20 mm × 86 mm ×198 mm
Weigth 210 g
Related links to "UniPi 1.1"
Read, write and discuss reviews... more
Customer evaluation for "UniPi 1.1"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed