DYNAMIXEL MX-64T

DYNAMIXEL MX-64T
Please inform me as soon as the product is available again.
Please enter these characters in the following text field.
₹37,659.00 * ₹40,409.00 * (6.81% Saved)

Prices incl. VAT plus shipping costs

Out of Stock

  • ROBT-902-0060-000
  • 902-0060-000
Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor +... more
Product information "DYNAMIXEL MX-64T"

Features

  • DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module.
  • MX-series is a new concept of DYNAMIXEL with advanced functions, such as precise control, PID control, 360 degree of position control, and high speed communication.

Advanced durability, degree of precision, and wider control zone were achieved thanks to the newly applied CONTACTLESS ABSOLUTE ENCODER

360 degrees POSITION CONTROL without dead zone

4,096 PRECISE RESOLUTION by 0.088 degrees

SPEED CONTROL at ENDLESS TURN MODE

Reliability and accuracy were advanced in the position control through PID CONTROL

High baud rate up to 4.5Mbps

Torque control via current sensing

Package Components

MX-64T 1
HN05-N102 1
Thrust Washer (for horn) 1
3P Cable 200mm 1
Wrench Bolt WB M2.5X4 16
Wrench Bolt WB M3X8 1
Nut M2.5 18

Compatible Products

Controller : CM-5, CM-510, CM530, CM-700, OpenCM9.04(+ OpenCM485 Expansion Board), OpenCR

Interface : USB2Dynamixel, U2D2

*NOT compatible with the HN05-N101 Set / T101 Set (for RX-64)

Factory Default Settings

ID : 1

Baud Rate : 57600bps

(User can change various settings including ID and baud rate according to environment)

Specification

Model Name MX-64T
MCU Cortex-M3 (72 [Mhz], 32 [bit])
Input VoltageMin. [V] 10.0
Recommended [V] 12.0
Max. [V] 14.8
Performance CharacteristicsVoltage [V] 12.0
Stall Torque [N·m] 6.00
Stall Current [A] 4.1
No Load Speed [rpm] 63.0
No Load Current [A] 0.15
Continuous OperationVoltage [V] -
Torque [N·m] -
Speed [rpm] -
Current [A] -
ResolutionResolution [deg/pulse] 0.0879
Step [pulse] 4,096
Angle [degree] 360
Position Sensor Contactless absolute encoder (12 [bit], 360 [deg])
Maker : ams(www.ams.com), Part No : AS5045
Operating TemperatureMin. [°C] -5
Max. [°C] 80
Motor Coreless (Maxon)
Baud RateMin. [bps] 8,000
Max. [bps] 4,500,000
Control Algorithm PID
Gear Type Spur
Gear Material Precious Metal
Case Material Engineering Plastic
Dimensions (WⅹHⅹD) [mm] 40.2 X 61.1 X 41
Dimensions (WⅹHⅹD) [inch] 1.58 X 2.41 X 1.61
Weight [g] 126.00
Weight [oz] 4.44
Gear Ratio 200 : 1
Command Signal Digital Packet
Protocol Type Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity)
Link (Physical) TTL Level Multi Drop Bus
ID 0 ~ 253
Feedback Position, Temperature, Load, Input Voltage, etc
Protocol version 1.0(Default)
2.0
Operating Mode / Angle Wheel Mode:Endless turn
Joint Mode:360 [deg]
Multi-turn Mode:±28 [rev]
Output [W] -
Standby Current [mA] 100
Related links to "DYNAMIXEL MX-64T"
Read, write and discuss reviews... more
Customer evaluation for "DYNAMIXEL MX-64T"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed