MDBT42Q - nRF52832 based BLE module

Please inform me as soon as the product is available again.

I have read the data protection information.

₹1,089.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • Seeed-317030213
MDBT42Q is a BT 4.0, BT 4.1 and BT 4.2 stack (Bluetooth low energy or BLE) module designed... more
Product information "MDBT42Q - nRF52832 based BLE module"

MDBT42Q is a BT 4.0, BT 4.1 and BT 4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

Features

Dual Transmission mode of BLE & 2.4 GHz RF upon customer preference.

Long working distance: over 80 meters in open space

Compact size with (L) 16 x (W) 10 x (H) 2.2 mm.

Low power requirements, ultra-low peak, average and idle mode power consumption.

Be compatible with a large installed base of mobile phones, tablets and computers.

Fully coverage of BLE software stack. See 1.3 Profile & Service Information.

BLE & RF transmission switching helps products fit all operation system and most hardware.

Specification

  • Multi-protocol 2.4GHz radio

  • 32-bit ARM Cortex – M4F processor

  • 512KB flash programmed memory and 64KB RAM

  • Software stacks available as downloads

  • Application development independent from protocol stack

  • On-air compatible with nRF51, nRF24AP and nRF24L series

  • Programmable output power from +4dBm to -20dBm

  • RAM mapped FIFOs using EasyDMA

  • Dynamic on-air payload length up to 256 bytes

  • Flexible and configurable 32 pin GPIO

  • Simple ON / OFF global power mode

  • Full set of digital interface all with Easy DMA including:

  • 3 x Hardware SPI master ; 3 x Hardware SPI slave

  • 2 x two-wire master ; 2 x two-wire slave

  • 1 x UART (CTS / RTS)

  • PDM for digital microphone

  • I2S for audio

  • 12-bit / 200KSPS ADC

  • 128-bit AES ECB / CCM / AAR co-processor

  • Lowe cost external crystal 32MHz ± 40ppm for Bluetooth ; ± 50ppm for ANT Plus

  • Lowe power 32MHz crystal and RC oscillators

  • Wide supply voltage range 1.7V to 3.6V

  • On-chip DC/DC buck converter

  • Individual power management for all peripherals

  • Timer counter

  • 5 x 32-bit

  • 3 x 24-bit RTC

  • NFC-A tag interface for OOB pairing

  • Granted main regional certification such as FCC (USA), CE (Europe), IC (Canada), TELEC (Japan), KCC (Korea), SRRC (China), and NCC (Taiwan)

  • RoHS and REACH compliant

Application

IoT

  • Home automation

  • Sensor networks

  • Building automation

Personal Area Networks

  • Health / fitness sensor and monitor device

  • Medical devices

  • Key-fobs and wrist watches

Interactive entertainment devices

  • Remote control

  • Gaming controller

Beacons

  • A4WP wireless chargers and devices

  • Remote control toys

Computer peripherals and I/O devices

  • Mouse

  • Keyboard

  • Multi-touch trackpad

Technical details

Dimensions 16mm x10mm x2.2mm
Battery Exclude
Related links to "MDBT42Q - nRF52832 based BLE module"
Read, write and discuss reviews... more
Customer evaluation for "MDBT42Q - nRF52832 based BLE module"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

I have read the data protection information.

Viewed