No results were found for the filter!
240mAh LiPo battery including 500mA USB charger
240mAh LiPo battery features Operating Temperature: 0 ～35°C (Charging) / -20～60°C (Discharging) Connector: Molex 51005-2P (Pin 1 positive) Electrical specification Capacity: 240mAh Nominal voltage: 3.7 V (1 Cell) Discharge: 15C Charge:...
Reflective marker kit 6.5mm
Super-spherical markers from Qualisys . The markers are high quality, threaded markers that can be used with the Motion capture marker deck , or stand alone. The markers are designed for maximum roundness and with their solid build, they...
Add the possibility to read and write files to a micro SD card. As an example it could be used for high speed logging or for storing configuration. For more information, see the SD-card deck web page . Features Automatic detection of...
Indoor explorer bundle
The indoor explorer bundle is great for getting started with our indoor positioning system, Loco positioning. This bundle contains everything you need to start experimenting with autonomous indoor flight. For more information on the Loco...
Loco positioning deck
The Loco positioning Deck is a Tag in the Loco Positioning system and measures the distance to Anchors. The distances are used to estimate the absolute position of the Crazyflie 2.X in the room, which can be used for autonomous flight....
Loco positioning node
The Loco Positioning Node is a versatile positioning device that can run either as an Anchor or Tag in a Loco Positioning system. The system measures the distance between Nodes and Tags, and from those distances the absolute position of...
The Roadrunner is a Loco positioning compatible tag that combines the hardware of a Crazyflie with the UWB positioning of the Loco products in a handy package. It's ready for mounting on 3rd party robots and supports power supplies up to...
Test new hardware easily without soldering by using the breakout expansion board. Just build the circuit on a breadboard and attach the Crazyflie 2.X to it. The board has all the 20 expansion connector pins available as well as a...
Z-ranger deck v2
The Z-ranger deck v2 uses a laser sensor to measure the distance to the ground and adds the possibility to fly with precise height control. Using the ToF sensor VL53L1x the Crazyflie 2.X can measure the distance from the sensor to a...
Flow deck v2
The Flow deck gives the Crazyflie 2.X the ability to detect its motions in any direction. The VL53L1x ToF sensor measures the distance to the ground with high precision and the PMW3901 optical flow sensor measures movements of the...
The multi-ranger deck gives the Crazyflie 2.X the ability to detect objects around it. This is done by measuring the distance to objects in the following 5 directions: front/back/left/right/up with mm precision up to 4 meters. To get the...
One of our goals is to make development with the Crazyflie 2.X as easy as possible. Due to the small size of the platform there are limitations in what connectors we can have and therefore we designed a debug-adapter kit that makes...