No results were found for the filter!
If you are new to electrochemical sensing, knowing what components you need can get confusing. Let us help you. The Atlas Scientific EZO-pH Kit gives you everything you need to take high accuracy, interference-free readings. Once you...
₹17,599.00 *
The Gen 2 Electrically Isolated USB EZO Carrier Board Allows you to connect your Atlas Scientific circuit directly to your computer or Raspberry Pi, using standard USB drivers (for an FTDI device). Built in isolation ensures that your...
₹3,519.00 *
Atlas Scientific Zero Dissolved Oxygen Calibration Solution is guaranteed not to have any oxygen in it. This stuff is great for calibrating the low end of the Dissolved Oxygen scale or to confirm that your Dissolved Oxygen probe is...
₹909.00 *
Although it is a common measurement, accurately reading pH is very difficult. Atlas Scientific’s EZO-pH circuit gives engineers the ability to read pH with the same accuracy and capabilities that were traditionally only found in...
₹4,999.00 *
This Atlas Scientific Lab Grade pH probe is our highest accuracy pH probe. The internal double junction lets you read the pH of protein rich solutions without damaging the probe. The green EXR glass tip makes pH sensing in highly pure...
₹9,349.00 *
This Industrial pH Probe can be fully submerged in fresh water or salt water, up to the tinned leads indefinitely. • 1 IXIAN™ pH Transmitter • 1 Industrial pH Probe • 3 250ml (8oz) calibration solutions (pH 4, pH 7 and pH 10) • 1 125ml...
₹52,029.00 *
Designed for industrial process control, the Atlas Scientific industrial pH probe has all the capabilities of our lab-grade pH probe and more! Because the probe is larger, it holds more internal electrolyte. This means it has a life...
₹35,199.00 *
Reads pH Range .001 − 14.000 Accuracy +/– 0.002 Calibration 1, 2, 3 point(remotely though PLCor directly on board) Supported probes Any type & brand Temp probe PT-100 or PT-1000 Auto Temp compensation Yes Mount 35mm Din rail Output 4 −...
₹21,979.00 *
• pH 10.00 • Works with any pH Probe • 125ml (4oz) or 250ml (8oz) • ±0.02 pH at 25°C • Standardized against NIST-certified references • 2 year shelf life at room temperature
₹1,239.00 *
• pH 4.00 • Works with any pH Probe • 125ml (4oz) or 250ml (8oz) • ±0.02 pH at 25°C • Standardized against NIST-certified references • 2 year shelf life at room temperature
₹1,239.00 *
• pH 7.00 • Works with any pH Probe • 125ml (4oz) or 250ml (8oz) • ±0.02 pH at 25°C • Standardized against NIST-certified references • 2 year shelf life at room temperature
₹1,239.00 *
Reads pH Range 0.001 − 14.000 Resolution 0.001 Accuracy +/– 0.002 Response time 1 reading every 420ms Supported probes Any type & brand Calibration 1, 2, 3 point Temp compensation Yes Data protocol SMBus/I2C Default I2C address 0x65...
₹5,049.00 *
Atlas Gen 3 Atlas Atlas Atlas Atlas Atlas Male and Female Atlas Atlas Atlas EZO-HUM Atlas Atlas Atlas BNC Panel Mount Non-isolated Inline PT-1000 Gas Flow Cap Atlas Atlas Atlas Atlas Atlas Atlas Atlas Atlas Atlas Atlas Atlas Atlas A-10 Analog Gen 3 Atlas Atlas Atlas Atlas Atlas Research Grade Atlas pH Calibration EZO Humidity Atlas Atlas Atlas Gen 3
Viewed