Close filters
 
  •  
  •  
from to
1 From 7
No results were found for the filter!
Pimoroni Inky wHAT (ePaper/eInk/EPD)
Pimoroni Inky wHAT (ePaper/eInk/EPD)
Inky wHAT is a 400x300 pixel, red, black, and white electronic paper (ePaper / eInk / EPD) display for Raspberry Pi, a larger version of our popular Inky pHAT display, with more than 5x the number of pixels. The larger display opens up...
₹7,199.00 *
Pimoroni AS7262 6-channel Spectral Sensor (Spectrometer) Breakout
Pimoroni AS7262 6-channel Spectral Sensor...
Detect six distinct channels of visible light with this fancy-pants spectral sensor! Unlike normal RGB colour sensors, with the AS7262 you'll get six bands of colour readings that roughly translate to red, orange, yellow, green, blue,...
₹2,999.00 *
Pimoroni LTR-559 Light & Proximity Sensor Breakout
Pimoroni LTR-559 Light & Proximity Sensor Breakout
This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity within a short range of ~5cm. The LTR-559 is the same sort of sensor that you'd find next to the camera in your phone to...
₹1,129.00 *
Pimoroni Ubercorn
Pimoroni Ubercorn
256 big, bright, colourful pixels on a 19x19cm matrix that you can control with your Raspberry Pi. Ubercorn is ideal as a big status display, or you can chain several together (up to 8) into a larger square or rectangular matrix....
₹6,749.00 *
Pimoroni Picade X HAT USB-C
Pimoroni Picade X HAT USB-C
Turn your Raspberry Pi into a retro games console! Picade X HAT includes joystick and button inputs, a 3W I2S DAC/amplifier, and soft power switch. Nice! Picade X HAT is now Raspberry Pi 4 compatible, with USB-C power! This HAT has all...
₹2,339.00 *
Pimoroni touch:bit
Pimoroni touch:bit
Six handy touch-sensitive buttons and LEDs for your micro:bit. Use touch:bit as a controller for games on micro:bit's LED matrix, or combine it with the radio functionality and use it as a controller for your robot. Just slot in your...
₹1,499.00 *
Pimoroni Breakout Garden HAT
Pimoroni Breakout Garden HAT
Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to six Pimoroni breakouts into the slots on Breakout Garden and get started coding and...
₹1,799.00 *
Pimoroni LSM303D 6DoF Motion Sensor Breakout
Pimoroni LSM303D 6DoF Motion Sensor Breakout
This 6 Degrees of Freedom Motion Sensor Breakout can detect acceleration in three axes - X, Y, and Z - as well as three axes of magnetic heading. It's ideal for building into robots, rockets, and rovers, or anywhere else where you want...
₹1,349.00 *
Pimoroni BH1745 Luminance and Colour Sensor Breakout
Pimoroni BH1745 Luminance and Colour Sensor...
A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino-compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a...
₹1,349.00 *
Pimoroni VL53L1X Time of Flight (ToF) Sensor Breakout
Pimoroni VL53L1X Time of Flight (ToF) Sensor...
An all-singing, all-dancing time of flight distance sensor that uses PEW PEW LASERS (low-powered ones), our VL53L1X breakout is easy to use with Raspberry Pi or Arduino alike! These low-power-laser-based time of flight sensors have great...
₹2,029.00 *
Pimoroni MINI.MU Glove Kit (without a micro:bit)
Pimoroni MINI.MU Glove Kit (without a micro:bit)
The MINI.MU gets kids crafting, coding and playing their own wearable instrument. NOTE: This kit does not contain a micro:bit! If you would like the kit that INCLUDES the micro:bit, we've got that! The MINI.MU is MI.MU's make-it-yourself...
₹4,499.00 *
Pimoroni MINI.MU Glove Kit (includes micro:bit)
Pimoroni MINI.MU Glove Kit (includes micro:bit)
The MINI.MU gets kids crafting, coding and playing their own wearable instrument. If you would like the kit WITHOUT the micro:bit included, we've got that! The MINI.MU is MI.MU's make-it-yourself musical glove for kids. It is a...
₹5,989.00 *
1 From 7
Viewed