Top seller
No results were found for the filter!
INTRODUCTION The Sony Spresense extension board is a board which extends the interfaces compared to the Spresense main board. The Spresense extension board has Arduino Uno pin compatible shape and 100 pin socket locations for connecting...
₹3,469.00 *
ESP32-C3-DevKitM-1 is an entry-level development board based on ESP32-C3-MINI-1, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth LE functions. Most of the I/O pins on the ESP32-C3-MINI-1 module are...
₹1,439.00 *
INTRODUCTION Beetle ESP32-C3, mainly intended for IoT applications, is a controller based on ESP32-C3 RISC-V 32bit single-core processor. On a coin-size board of 25*20.5 mm, there are up to 13 IO ports broken out, so you don't have to...
₹789.00 *
INTRODUCTION "Greenhouse Effect" is melting the Earth ice core every minute and creating dangerous icebergs. By knowing the exact concentration of CO2, we can do something to reduce the CO2 and to protect our Earth. For that reason, this...
₹5,329.00 *
INTRODUCTION This RS-485 Sensor Node module can be used in various applications such as intelligent agriculture, environment monitoring,home automation...etc. It is a Internet of things device. This RS-486 Sensor node provides 6 channel...
₹2,689.00 *
INTRODUCTION Annoyed with finding screwdriver when connecting wires, this Screwless Terminal Shield is a new way to plug wires to a terminal. This shield features modular screwless terminal blocks which are flexible and efficient and the...
₹949.00 *
INTRODUCTION Romeo family is an All-in-One Arduino based control board especially designed for robotics applications from DFRobot. It benefits from the Arduino open source platform, it is supported by thousands of open source codes, and...
₹3,919.00 *
INTRODUCTION This is a 100 Farad capacitor. Combine two in series for 50F/5.4V. Our testing told us that two of these can power Arduino for 4 hours (with one LED). And you can recharge the capacitor just within 30 seconds. It can be used...
₹1,189.00 *
INTRODUCTION The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons (Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module (SKU:TEL0005) interface and the...
₹1,449.00 *
INTRODUCTION Wido is an Arduino compatible WIFI IoT Node development board, which integrates with WG1300 WIFI solution. The microcontroller of Wido is ATMEL ATmega32U4. Wido are compatible with copious amounts of Arduino and periphery...
₹2,689.00 *
INTRODUCTION DFRobot introduces the DFRobot Capacitive Touch Kit For Arduino . This kit comes with three types touch sensors, an ipod style wheel touch, a keypad touch which supports backlit and a grid touch pad which can recognize...
₹1,929.00 *
INTRODUCTION The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs. The module is easy to use, low power consumption, and the provision of critical data between...
₹1,069.00 *
LattePanda V1 - Gravity Gravity Analog Gravity Geiger Air Quality ESP32-C3-DevKit Gravity Heart Gravity Analog DFRobot A02YYUW Capacitive Gravity Analog TF Mini LiDAR Bionic Robot Gravity UART Screwless Gravity Analog Beetle ESP32 - mmWave Radar - 8 Megapixels 6 1 Microphone BME680 Gravity CL2 Weather Station ME007YS TB6600 Stepper Gravity Analog 5-DOF Robotic Metal Mecanum Serial 6-Axis Gravity CO PYNQ-Z2 High Power Sony Spresense Gravity CCS811 Particle Photon 6 DOF Robotic Gravity Analog Capacitive Gravity BNO055 Gravity Maix Bit AI Fermion VL6180X Intel Galileo Gravity Analog TS01
Viewed