Close filters
 
  •  
  •  
from to
1 From 54
No results were found for the filter!
MyoWare 2.0 Reference Cable
MyoWare 2.0 Reference Cable
The MyoWare® 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor pad into the electrode snap. When ready,...
₹189.00 *
SparkFun Triple Axis Magnetometer Breakout - MAG3110
SparkFun Triple Axis Magnetometer Breakout -...
Freescale’s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis accelerometer to produce orientation independent accurate compass heading information. It features a standard I2C...
₹1,479.00 *
Hint!
Solenoid - 5v (small)
Solenoid - 5v (small)
Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects. It has a throw of...
₹489.00 *
MyoWare 2.0 Arduino Shield
MyoWare 2.0 Arduino Shield
The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack...
₹1,599.00 *
MyoWare 2.0 Link Shield
MyoWare 2.0 Link Shield
The MyoWare® 2.0 Link Shield is designed to easily connect a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller. The shield provides a 3.5mm TRS jack so that you can use a 3.5mm TRS-to-TRS cable to link the boards together. The...
₹1,999.00 *
MyoWare 2.0 Power Shield
MyoWare 2.0 Power Shield
The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the top side of the...
₹2,199.00 *
Arduino Uno - R3 SMD
Arduino Uno - R3 SMD
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates...
₹2,969.00 *
SparkFun LilyPad Arduino 328 Main Board
SparkFun LilyPad Arduino 328 Main Board
The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight,...
₹1,589.00 *
LilyPad LiPower
LilyPad LiPower
A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter,...
₹1,559.00 *
Capacitive Touch Sensor Controller - MPR121QR2
Capacitive Touch Sensor Controller - MPR121QR2
The MPR121QR2 is an I 2 C driven capacitive touch sensor controller, capable of managing up to twelve electrodes. The chip also has eight LED driving pins, which, when not configured to control electrodes, can be used to drive LEDs. The...
₹729.00 *
Dual Axis MEMs Gyro - LPR5150AL 1500°/s
Dual Axis MEMs Gyro - LPR5150AL 1500°/s
The LPR5150AL is low-power two-axis micromachined gyroscope able to measure angular rate along the pitch and roll axes. All required electronics are integrated onto a single chip with the sensor. The LPR5150AL has a full scale of ±1500...
₹669.00 *
KTA-223 Home Automation Controller
KTA-223 Home Automation Controller
The KTA-223 Relay Board is a USB or RS485 controlled module that can interface a PC to eight or more SPDT relays. This could be very useful for controlling real world devices - such as lights and sprinkler systems - and reading sensors...
₹16,129.00 *
1 From 54
Viewed