Top seller
No results were found for the filter!
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 &...
This is a 3.3/5V compatible MEMS gas concentration sensor from DFRobot. This sensor supports the detection of various gas concentrations like CO, C2H5OH (Alcohol), H2, NO2, NH3, and integrates various gas concentration conversion...
₹4,699.00 *
Anemometer Kit 0-5V (IP65 grade)
Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard current generator. Made with aluminium...
₹4,749.00 *
Gravity: Analog Gas Sensor (MQ2) For Arduino
This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke. It can be used in gas leakage detecting device in consumer and industry markets. It has a high...
₹689.00 *
Weather Station Kit with Anemometer/Wind...
Ever want to build your own weather station? This IoT weather station kit includes an anemometer , wind vane, and rain bucket . The serial communication method provides good compatibility and makes it easy to use with most controllers in...
₹16,499.00 *
Gravity: I2C Ozone Sensor (0-10ppm)
Gravity: I2C Ozone Sensor (0-10ppm) is based on electrochemical principles and it can measure the ambient O3 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity, this...
₹4,859.00 *
Gravity: Analog Carbon Monoxide Sensor (MQ7)...
This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO) concentrations in the air from 20 to 2000ppm. The sensitivity can be adjusted by the potentiometer. The output is proportional to the density of...
₹979.00 *
Gravity: CO Sensor (Calibrated) - I2C & UART
This is a sensor that detects carbon monoxide and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of carbon monoxide in the...
₹7,799.00 *
Gravity: O2 Sensor (Calibrated) - I2C & UART
This is a sensor that detects oxygen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of oxygen in the...
₹8,409.00 *
F1031V Mass Air Flow Sensor
F1031V Mass Air Flow Sensor adopts thermodynamic principle to detect flow rate of gas medium in the flow channel, with high precision and good repeatability. It comes with built-in temperature sensor to provide temperature compensation...
₹8,499.00 *
Fermion: MEMS Gas Sensor - MiCS-5524 (Breakout)
This is a hydrogen and nitrogen oxide gas concentration sensor launched by DFRobot. The sensor uses MEMS technology to support gas concentration detection of CO, CH4, C2H5OH, C3H8, C4H10, H2, H2S and NH3. The matching sample code...
₹979.00 *
RS485 Wind Speed Transmitter
This wind speed sensor is a professional meteorological instrument used to measure horizontal wind speed within 0~32.4m/s. It integrates a hall sensor inside. The shell and wind cups are made of aluminum alloy material and use special...
₹4,459.00 *
Fermion: MEMS Gas Sensor - MiCS-2714 (Breakout)
This is a hydrogen and nitrogen oxide gas concentration sensor launched by DFRobot. The sensor uses MEMS technology to support gas concentration detection of NO, NO2 and H2. The matching sample code integrates the concentration...
₹1,199.00 *
Super Capacitor Gravity Analog Waterproof Gravity Analog Maixduino AI URM37 V5.0 LattePanda - A Gravity SGP40 Gravity i2C TB6600 Stepper PYNQ-Z2 Semi Flexible Gravity ENS160 RS485 Connector LattePanda - MXChip Gravity Analog RS485 Wind Non-contact Gravity Analog micro Maqueen Gravity BMP388 Bionic Robot Camera for LattePanda V1 - e-ink Display Weatherproof mmWave Radar - Gravity I2C Gravity I2C Arduino Mini Gravity Tipping USB TTL TS01 Raspberry Pi Acrylic Case URM14-RS485 A02YYUW Arduino Gravity Analog Gravity Digital Gravity Analog Fermion SHT20 I2C Monocrystalline
Viewed