SparkFun Air Quality Sensor - SGP30 (Qwiic)

Please inform me as soon as the product is available again.
Please enter these characters in the following text field.
₹2,199.00 *

Prices incl. VAT plus shipping costs

Out of Stock

  • SFES-SEN-16531
  • SEN-16531
The SparkFun SGP30 Air Quality Sensor provides information on the quality of the air in your... more
Product information "SparkFun Air Quality Sensor - SGP30 (Qwiic)"

The SparkFun SGP30 Air Quality Sensor provides information on the quality of the air in your room or house by monitoring the volatile organic compounds around the sensor. The SGP30 Air Quality Sensor can return valid indoor air quality (IAQ) readings within 15 seconds of powering up! By comparison, typical air quality (IAQ) sensors are great for measuring CO2 and volatile organic compounds (VOCs) but some of them require a burn-in time of 48 hours and a 20-min start up time.

Along with a very quick start-up time, the SGP30 is very resistant to contamination from other gases to ensure low drift and long-term stability for extremely reliable results. You can read the SGP30 gas sensor output measurements of total VOCs (TVOC) in parts per billion (ppb), carbon dioxide (CO2) equivalent in parts per million (ppm) and H2.

The SGP30 communicates via I2C so naturally we broke out the pins on the sensor to Qwiic connectors so you can easily connect it to SparkFun's ever growing Qwiic Ecosystem!

Feature

  • Uses I2C interface (Qwiic-enabled)
    • I2C Address: 0x58
    • 2x Qwiic Connectors
  • Operating voltage range
    • 1.62V - 1.98V (Typ. 1.8V)
    • Regulated to 1.8V from a 3.3V source if using the Qwiic cable
  • TVOC Output Signal
    • Output range: 0 ppb to 60,000 ppb
    • Resolution: Avg. 13 ppb. Refer to datasheet for specifics
  • CO2 Output Signal
    • Output range: 400 ppm to 60,000 ppm
    • Resolution: Avg. 11ppm. Refer to datasheet for specifics
  • Ethanol Signal
    • Measurement Range: 0 ppm to 1,000 ppm
    • Accuracy: Typ. 15% of meas. value
    • Resolution: 0.2% of meas. value
  • H2 Signal
    • Measurement Range: 0 ppm to 1,000 ppm
    • Accuracy: Typ. 10% of meas. value
    • Resolution: 0.2% of meas. value
  • Typical current consumption (varies based on mode)
    • 48.2 mA Typ. (Measurement Mode)
    • 2µA (Typ.) to 10µA (Sleep Mode)
Related links to "SparkFun Air Quality Sensor - SGP30 (Qwiic)"
Read, write and discuss reviews... more
Customer evaluation for "SparkFun Air Quality Sensor - SGP30 (Qwiic)"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed