Prices incl. VAT plus shipping costs
Out of Stock
- Order number: MIKROE-498
This Product has been discontinued.
The EasyLV-18F v6 development system supports 40-, 28- and 20-pin PIC18J and PIC18K microcontroller families from Microchip. It comes with a PIC18F45K20. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Serial RAM, EEPROM, COG Display, etc.
On-Board USB 2.0 programmer with mikroICD (In-Circuit Debugger). mikroICD is a highly effective tool for Real-Time debugging at hardware level. It enables you to execute mikroC, mikroPascal and mikroBasic programs on a host PIC18J or PIC18K MCU and monitor variables values, Special Function Registers (SFRs), RAM and EEPROM memory modules while the program is running. There is also an ultra fast USB 2.0 programmer that supports a wide range of PIC18J and PIC18K MCUs.
PORTs, buttons and LEDs
PORTs, buttons and LEDs. 70 push buttons and 70 LEDs are connected to all microcontrollers pins. DIP switch is used to separate port pins from pull-up/pull-down resistors. 2 potentiometers are provided for testing multiple A/D conversions. Inputs can be configured via jumpers.
Displays and Touch screen. Graphic LCD 128x64 and LCD 2x16 can be easily connected via the on-board connectors. Board also features a Touch Screen controller. On-board 2x16 Character COG Display is connected via Port Expander.
Communication and Interfaces
RS-232 communication is enabled via DB9 connector and MAX232 level converter. USB UART module features the FT232RL interface between a USB device and the microcontroller. USB communication connectors are available for microcontrollers with USB facilities. 16-bit I/O port expander MCP23S17 enables you to add more inputs or outputs.
EEPROM, Piezo buzzer
RAM, EEPROM, Buzzer, Temperature sensor. Board features Serial EEPROM Module 24AA01 which can store up to 1Kbit of data and uses I2C communication and 64Kbit Serial RAM 23K640 with SPI interface. Piezo buzzer enables sound signalization, while temperature sensor DS1820 measures temperature from -55°C to 125°C. It is connected to the system via 3-pin socket.
- EasyLV-18F v6 development system.
- USB cable
|Applications||The EasyLV-18F v6 development system provides a development environment for experimenting with PIC microcontrollers|
|Displays||Connector for LCD 2x16 and GLCD 128x64, 2x16 Character COG Display,|
|Graphic controller||Embedded inside MCU|
|MCU||Comes with PIC18F45K20|
|On-board modules||A/D Potentiometer, 35 LEDs and push buttons, Socket for DS1820 temperature sensor|
|Programming||On-Board USB 2.0 programmer and On-Board mikroICD (In-Circuit Debugger|
|Interface||USB-UART (FT232RL), RS232 (MAX232 )|
|Storage||1KB Serial EEPROM (24AA01), 64 KB Serial RAM (23K640)|
|Sound and Audio||Piezo buzzer|
|Expandability||1 x IDC10 header for each PORT|
|Input Voltage||5V (via USB) or 9-32V AC, 7-23V DC (via adapter)|