Products from Bitcraze
No results were found for the filter!
Prototyping deck
Add a prototyping area to your Crazyflie 2.X and lift your electronics into the air. Just solder directly on the expansion board and plug it to the expansion port. For more information, see the Prototyping deck web page Features...
₹549.00 *
Breakout deck
Test new hardware easily without soldering by using the breakout expansion board. Just build the circuit on a breadboard and attach the Crazyflie 2.X to it. The board has all the 20 expansion connector pins available as well as a...
₹549.00 *
Z-ranger deck v2
The Z-ranger deck v2 uses a laser sensor to measure the distance to the ground and adds the possibility to fly with precise height control. Using the ToF sensor VL53L1x the Crazyflie 2.X can measure the distance from the sensor to a...
₹2,419.00 *
Flow deck v2
The Flow deck gives the Crazyflie 2.X the ability to detect its motions in any direction. The VL53L1x ToF sensor measures the distance to the ground with high precision and the PMW3901 optical flow sensor measures movements of the...
₹5,499.00 *
Multi-ranger deck
The multi-ranger deck gives the Crazyflie 2.X the ability to detect objects around it. This is done by measuring the distance to objects in the following 5 directions: front/back/left/right/up with mm precision up to 4 meters. To get the...
₹9,899.00 *
Debug adapter
One of our goals is to make development with the Crazyflie 2.X as easy as possible. Due to the small size of the platform there are limitations in what connectors we can have and therefore we designed a debug-adapter kit that makes...
₹3,629.00 *
Flow breakout board
The Flow breakout board is used for motion tracking and can easily be connected to any robotics project or other design. The motion of a surface, usually the ground, is measured and is reported as delta X, delta Y by the optical flow...
₹4,949.00 *
Lighthouse positioning deck
The Lighthouse deck uses the HTC Vive base stations (aka Lighthouse) to achieve high precision positioning. The deck has 4 receivers which gives position and will in the future also give pose of the Crazyflie. The hardware supports both...
₹9,899.00 *
Motion capture marker deck
Placing motion capture markers on the Crazyflie 2.X can be a hassle, but this deck makes it really easy. With lots of holes to mount markers in you can create different configurations to support identification. The deck is designed in...
₹659.00 *
Active marker deck
The active marker deck gives uses robust and long range tracking using Qualisys QTM. The deck supports up to 4 IDs so it's possible to have many different configurations without having to carry around bulky spherical markers. The...
₹16,499.00 *
Reflective marker kit 6.5mm
Super-spherical markers from Qualisys . The markers are high quality, threaded markers that can be used with the Motion capture marker deck , or stand alone. The markers are designed for maximum roundness and with their solid build, they...
₹10,449.00 *
250mAh LiPo battery including 500mA USB charger
240mAh LiPo battery features Operating Temperature: 0 ~35°C (Charging) / -20~60°C (Discharging) Connector: Molex 51005-2P (Pin 1 positive) Electrical specification Capacity: 240mAh Nominal voltage: 3.7 V (1 Cell) Discharge: 15C Charge:...
₹1,099.00 *
USB UART 3 Arduino Nano 33 JTAG-HS3 OpenRB-150 Google AIY Libelium Smart Kria KR260 RS485 Wind Nvidia Jetson MikroC PRO for M1000 Standard Basys 3 Artix-7 mikroBUS Shield Carbon Fiber NVIDIA Jetson Google AIY C2000 Delfino Carbon Fiber RUT200 Particle Matter Arduino YUN - DALI 2 click Atlas Pixhawk 4 - ESP32-CAM Raspberry Pi Arduino Primo LoCoBot WX250 RUBIK LINK V2.0 WidowX 250 16mm Universal U Efficiency DYNAMIXEL 6 inch 152mm Air quality 3 R80 KV110 Google Coral JetRacer Ready for PIC Pressure Gravity SGP40 Unipi Neuron Analog Google Coral ReactorX 200 USB SPI click
Viewed