Products from Digilent

Close filters
 
from to
1 From 18
No results were found for the filter!
JTAG-USB Cable
JTAG-USB Cable
The JTAG-USB cable allows you to use your PC to connect to a JTAG scan chain or to access an SPI interface on a board equipped with the appropriate 6-pin header. In this way, you can program devices on Digilent programmable logic boards...
₹5,899.00 *
Pmod IA: Impedance Analyzer
Pmod IA: Impedance Analyzer
The Digilent Pmod IA provides users with a way to measure the electrical impedance of a circuit. It is powered by the Analog Devices AD5933, a high precision impedance converter system solution that combines an on-board frequency...
₹4,479.00 *
Pmod CON3: R/C Servo Connectors
Pmod CON3: R/C Servo Connectors
The Pmod CON3 can be easily used to interface with up to four small servo motors that deliver anywhere from 50 to 300 ounce/inches of torque, such as those used in radio controlled airplanes or cars, as well as some mechatronics...
₹569.00 *
Basys 3 Artix-7 FPGA Trainer Board: Recommended for Introductory Users
Basys 3 Artix-7 FPGA Trainer Board: Recommended...
The Basys 3 is an entry-level FPGA development board designed exclusively for Vivado Design Suite , featuring Xilinx Artix-7 FPGA architecture. Basys 3 is the newest addition to the popular Basys line of FPGA development boards, and is...
₹17,129.00 *
JTAG-HS3 Programming Cable
JTAG-HS3 Programming Cable
The JTAG-HS3 is the newest member of our family of affordable high-speed Xilinx ® FPGA programming solutions. The HS3 builds on the successful JTAG-HS1 by adding an open-drain buffer to pin 14 allowing for the debugging of Xilinx...
₹5,899.00 *
Cmod A7-35T: Breadboardable Artix-7 FPGA Module
Cmod A7-35T: Breadboardable Artix-7 FPGA Module
The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM,...
₹8,899.00 *
Pmod MAXSONAR: Maxbotix Ultrasonic Range Finder
Pmod MAXSONAR: Maxbotix Ultrasonic Range Finder
The Pmod MAXSONAR is a single-transducer ultrasonic range finder that uses the MaxBotix ® LV-MaxSonar ® -EZ1™ . Users can measure how far away an object is with an accuracy within 1 inch to over 20 feet away. Information is sent in a...
₹2,599.00 *
Pmod COLOR: Color Sensor Module
Pmod COLOR: Color Sensor Module
The Digilent Pmod COLOR is a color sensor module with the ability to sense red, green, blue and clear light. The onboard AMS's TCS3472 integrates an IR blocking filter to accurately determine the color of objects as well as sense ambient...
₹1,149.00 *
Getting Started with chipKIT: The Arduino-compatible PIC32 Based Module
Getting Started with chipKIT: The...
In this book, Chuck Hellebuyck, author of many entry-level technical books, shows you how to get started with the chipKIT™ Uno32 using very simple example projects. These projects demonstrate the use of digital inputs & outputs, analog...
₹2,639.00 *
Analog Discovery 2 Student Bundle
Analog Discovery 2 Student Bundle
Start building a wide variety of useful circuits and devices from the large selection of parts and components included in the Analog Parts Kit. With the Analog Discovery 2 USB oscilloscope, you'll be able to measure, visualize, generate,...
₹38,949.00 *
Analog Discovery 2 Pro Bundle
Analog Discovery 2 Pro Bundle
Start verifying and testing a wide range of projects with the Analog Discovery 2. With the addition of the BNC adapter and scope probes, professional or experienced engineers can access the full 30MHz bandwidth oscilloscope and 12MHz...
₹34,469.00 *
6-pin MTE Cable
6-pin MTE Cable
Features: Provides the option to separate 6 signals using MTE connectors 6-pin connectors are standard 100mil spaced 25mil square connectors Can be used with any Digilent board Ideal for testing and verification
₹799.00 *
1 From 18
Viewed