• This temperature thermowell is used to protect temperature probes placed in systems with high pressure or flow. • 100mm thermowell extension • Temperature range: -273°C to 1300°C • Threading: 1/2" NPT • Material: 304 stainless steel •...

• This temperature thermowell is used to protect temperature probes placed in systems with high pressure or flow. • 30mm thermowell extension • Temperature range: -273°C to 1300°C • Threading: 1/2" NPT • Material: 304 stainless steel •...

• This temperature thermowell is used to protect temperature probes placed in systems with high pressure or flow. • 50mm thermowell extension • Temperature range: -273°C to 1300°C • Threading: 1/2" NPT • Material: 304 stainless steel •...

The PT-1000 can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely. • 1 EZO™ RTD Temperature Circuit • 1 Temperature Thermowell (choice of 100mm, 50mm or 30mm) • 1 PT-1000 Temperature Probe with BNC...

The PT-1000 can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely. Reads Temperature Range -200 ̊C to 850 ̊C Probe type Class A platinum, RTD Accuracy +/- (0.15 + (0.002*t)) Connector Male BNC Reaction...

RTD Resistance Temperature Detector Reads Temperature Range -126.000 °C − 1254 °C Resolution 0.001 Accuracy +/– (0.10 ̊C + 0.0017* ̊C) Response time 1 reading per sec Supported probes Any type & brand PT-100 or PT-1000 RTD Calibration...

The ENV-TMP-D can be fully submerged in fresh water or salt water, up to the tinned leads indefinitely. • Wide temperature range: -20 Celsius to 133 Celsius • Resolution within two significant figures (XXX.XX) • Accuracy: ± 1°C • Cable...

For those engineers tasked with mass-producing a device that needs accurate temperature sensing capabilities, the OEM-RTD is a quick and easy solution to a complex problem. This small 11×13 mm SMD component gives you the ability to...

If you have ever had to add an RTD module to a PLC, then you know firsthand just how complicated and expensive they can be. The RTD3 transmitter is designed to be a simple and cost-effective alternative to traditional RTD modules for...

If you have ever had to add an RTD module to a PLC, then you know firsthand just how complicated and expensive they can be. The RTD3 transmitter is designed to be a simple and cost-effective alternative to traditional RTD modules for...

The Industrial PT-1000 Temperature Probe is a high-accuracy 4-wire temperature sensor. Internally it uses a class A PT-1000 platinum resistance temperature detector. The sensor is food safe and can be screwed into a pipe or a tank using...

The Atlas Scientific Spike Tip Temperature probe is a Class-B platinum RTD temperature probe. This probe has a long, thin body making it perfect for impaling into the Earth or food. The 304 stainless steel body makes this probe food...