The Atlas Scientific pH Up and Down is simple to use and straight to the point. Use this product sparingly. Before you begin adding pH up and down to your water or soil, test the pH to confirm that you need to raise or lower the pH...

The Atlas Scientific pH Up and Down is simple to use and straight to the point. Use this product sparingly. Before you begin adding pH up and down to your water or soil, test the pH to confirm that you need to raise or lower the pH...

The Atlas Scientific Micro-pH Probe kit comes with everything you need to make an embedded microfluidics pH monitoring system. This kit makes it easy to take calibrated, high accuracy readings from a micro-pH probe. The Atlas Scientific...

The Atlas Scientific Micro-pH Probe was designed for microfluidics and other small applications. Because the probe is so small, it had to be built as a half cell pH probe. A ½ cell probe works just like a normal pH probe, but it consists...

If you are building a machine that requires pH measuring capabilities, but you only need the accuracy found in a low-cost handheld pH meter, the Atlas Scientific Gravity pH meter might be for you. Simple to use and straight to the point,...

This pH Probe can be fully submerged in fresh water or salt water, up to the SMA connector indefinitely. Silver / silver chloride Reads pH Range 0 − 14 Accuracy +/– 0.002 Connector Female SMA Resolution +/- 0.0001 Response time 95% in 1s...

Features: • Fully assembled touch screen pH meter. • No assembly or setup required. • Includes laboratory grade pH and Temperature probes. • Easily updatable firmware. • Cloud connectivity via MQTT now available! IoT pH Meter comes with...

Features • 1 Gravity™ Analog pH Sensor / Meter • 1 Silver / silver chloride Consumer Grade pH Probe • 1 SMA to SMA adapter • 3 calibration solutions packets (pH 4, 7 and 10) Gravity™ dimensions 69mm x 32mm (2.7" x 1.2") Weight: 2.53 grams

Reads pH Range 0.001 − 14.000 Resolution 0.001 Accuracy +/– 0.002 Response time 1 reading every 420ms Supported probes Any type & brand Calibration 1, 2, 3 point Temp compensation Yes Data protocol SMBus/I2C Default I2C address 0x65...

• pH 7.00 • Works with any pH Probe • 125ml (4oz) or 250ml (8oz) • ±0.02 pH at 25°C • Standardized against NIST-certified references • 2 year shelf life at room temperature

• pH 4.00 • Works with any pH Probe • 125ml (4oz) or 250ml (8oz) • ±0.02 pH at 25°C • Standardized against NIST-certified references • 2 year shelf life at room temperature

• pH Probe Storage Solution • 125ml (4oz) • 2 year shelf life at room temperature